NEC MT1075/MT1065 user manual

Page 59

If there is no picture, or the picture is not displayed correctly.

•Power on process for the projector and the PC.

Be sure to connect the RGB cable between the projector and the computer before turning on the computer. There are some notebook PCs, which do not output signal unless there is a projectors or monitor connected first.

NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this means there is no signal being output from the computer. See page E-54 or go to next step.

•Enabling the computer’s external display.

Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

•Non-standard signal output from the computer

If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed correctly. Should this happen, deactivate the notebook PC’s LCD screen when the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the previous step. Refer to your computer’s documentation for detailed information.

•Image displayed is incorrect when using a Macintosh

When using a Macintosh with the projector, set the DIPswitch of the Mac adapter (not supplied with the projector) according to your resolution. After setting, restart your Macintosh for the changes to take affect.

For setting display modes other than those supported by your Macintosh and the projector, changing the DIP switch on a Mac adapter may bounce an image slightly or may display nothing. Should this happen, set the DIP switch to the 13” fixed mode and then restart your Macintosh. After that, restore the DIP switches to a displayable mode and then restart the Macintosh again.

NOTE: A Video Adapter cable manufactured by Apple Computer is needed for a PowerBook which does not have a mini D-Sub 15-pin connector.

•Mirroring on a PowerBook

*When using the projector with a Macintosh PowerBook, output may not be set to 1024 × 768 unless “mirroring” is off on your PowerBook. Refer to owner’s manual supplied with your Macintosh computer for mirroring.

•Folders or icons are hidden on the Macintosh screen

Folders or icons may not be seen on the screen. Should this happen, select [View] → [Arrange] from the Apple menu and arrange icons.

E-59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents MT1075/MT1065 Safety Cautions For North America only MT1065 only Fire and Shock PrecautionsLamp Replacement Whats in the Box?Table of Contents Introduction to the Projector Features youll enjoyIntroduction Carrying the Projector Part Names of the ProjectorAttaching the lens cap Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlSelect Using the Remote Control in Wired Operation Battery InstallationRemote Control Precautions Operating Range for Wireless Remote ControlSelecting a Location Installation and ConnectionsSetting Up the Screen and the Projector Reflecting the Image Distance ChartDo not attempt to install the projector yourself Throw Distance and Screen SizeConnecting Your PC with a DVI Connector When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting to RGB 2 in connectorsTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationSelecting a Source Adjusting the Picture Size and PositionUsing the Remote Control Adjust the Tilt FootUse the Focus Button +/- to obtain the best focus When using the remote control or cabinet buttonsUsing Auto Focus FocusConfirmation screen is displayed When using the USB connected to the projectorOptimizing RGB Picture Automatically Turning Up or Down VolumeUsing the Laser Pointer Adjusting the Image Using Auto AdjustTo turn off the projector Setting the function switchTurning off the Projector Using the Remote Mouse Function Convenient FeaturesAuto 3D Reform Executing the Auto 3D Reform featureAdjustment Setting Screen of Auto 3D ReformGetting the On-line Help Using the PointerFreezing a Picture Using the middle button on the mouse Using a USB Mouse Using the USB HUB FunctionOperate the Menus using the USB mouse USB Memory Device or USB Memory Card Reader Support Changing Background LogoMaking Freehand Drawings on a Projected Image ChalkBoard Making the Most out of the Viewer Function Using the ViewerProjecting slides Viewer When the tool bar is not displayedOperating the Viewer Function from the Projector playback Preparations Auto Play ModeSwitching to Slides Directly from Other Input Modes Viewing Digital ImagesTo delete captured images Using the PC Card Files Fucntion PC Card FilesDeleting Captured Images Basic Menu Operation Using ON-SCREEN MenuUsing the Menus Default Custom Menu items areAdvanced Menu Menu treeCommunication Speed Operation Mode SelectDefault Source Select WEP Menu Elements Source Select Entering Alphanumeric Characters by Using the MenuMenu Descriptions & Functions Image Options Entry Edit CommandPicture not available for Viewer and LAN SoundPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModePared to use of 64bit datalength encryption WEP for Wireless onlyNications may be monitored by someone Uses 64-bit datalength for secure transmissionDelete Setting a PasswordStatus EntryTo delete PC card data you registered To enable Security, use the SelectSecurity Help Returning to Factory DefaultTools To replace the lamp MaintenanceReplacing the Lamp Vacuum the filter-through the filter cover CleaningCleaning or Replacing the Filter Cleaning the Cabinet and the LensLamp Indicator TroubleshootingPower Indicator Status IndicatorFor more information contact your dealer Common Problems & Solutions Check These ItemsImage isn’t square to Page Model Number MT1075 Optical SpecificationsModel Number MT1065 Optical Pin No RGB Signal Analog YCbCr Signal Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin ConnectorCompatible Input Signal List Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard PC Control Codes and Cable ConnectionHandling of the Address for Operation via a Browser Operation Using an Http BrowserOverview Preparation Before UseTravelCare Guide TravelCare a service for international travelersServices offered with TravelCare Term of warrantyKuala Lumpur, Malaysia Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1075/MT1065 specifications

The NEC MT1075 and MT1065 are high-quality projectors that cater to various presentation needs, making them popular choices in both business and educational settings. Known for their impressive specifications and features, these models deliver outstanding performance, complemented by advanced technologies.

One of the standout features of the NEC MT1075 and MT1065 is their brightness. The MT1075 boasts a luminous output of 3700 ANSI lumens, while the MT1065 offers a slightly lower output of 3600 ANSI lumens. This high brightness level ensures that images remain clear and vivid, even in well-lit environments, making them suitable for large auditoriums, classrooms, and conference rooms.

These projectors employ DLP (Digital Light Processing) technology, which enhances image quality by providing sharp, vibrant colors and high contrast ratios. DLP technology ensures that moving images appear smooth and free from motion blur, making these projectors ideal for displaying videos, animations, and dynamic presentations. The MT1075 and MT1065 also support various resolution formats, with their native SVGA (800 x 600) resolution able to accommodate higher resolutions with clarity.

Another significant characteristic of these projectors is their connectivity options. Both models offer a range of input ports, including VGA, composite video, and S-Video, ensuring compatibility with multiple devices such as laptops, DVD players, and gaming consoles. Additionally, they feature audio input and built-in speakers, providing a complete multimedia experience.

The lightweight design of the NEC MT1075 and MT1065 enhances portability, making them easy to transport and set up in different locations. Their built-in features, such as keystone correction and manual zoom, provide flexibility in positioning the projectors and adjusting the image to fit various screen sizes.

Energy efficiency is another important aspect of the NEC MT1075 and MT1065. Both models utilize advanced lamp technology that ensures long-lasting performance, reducing the frequency of lamp replacements and associated maintenance costs.

Overall, the NEC MT1075 and MT1065 projectors are versatile and reliable, making them suitable for a wide range of applications. Their combination of brightness, advanced DLP technology, connectivity options, and user-friendly features make them an excellent choice for professionals and educators looking to make impactful presentations. With their durability and enhanced image quality, the MT1075 and MT1065 stand out in the competitive projector market.
Top Page Image Contents