NEC NP2000, NP1000 setup guide Attaching Wireless LAN Card, Setting card in PC card slot

Page 13

4. Attaching Wireless LAN Card

4. Attaching Wireless LAN Card

Insert the wireless LAN card into the PC card slot on the rear panel of the projector.

Important

•The wireless LAN card must be inserted into the PC card slot in the correct direction. It cannot be inserted in the reverse direction. If the card is inserted in the reverse direction with excessive force applied, the pins in the projector and the PC card slot may break. Be sure to insert the wireless LAN card with its label facing up.

•Before touching the LAN card, touch a metallic object (such as a door knob or aluminum window frame) to discharge the static electricity from your body.

•Always insert or remove the wireless LAN card when the main power is turned off. Failure to do so may cause projector malfunction or damage to the wireless LAN card. If the projector will not work correctly, turn off the projector, wait 30 seconds, and turn it back on.

■Setting card in PC card slot

1Press POWER ON/STAND BY button to set the projector to Stand-by mode, press the “O (off)” side of the main power switch of the projector.

2With the label on the wireless LAN card facing up, slowly insert the card into the slot horizontally.

Note

Do not apply any excessive force while inserting the card.

SELECT
3D	REFORM
	REFORM
	AUTO	ADJUST
		ADJUST

SOURCE

ON/S	TAND
	TAND	BY

4

Attaching Wireless LAN Card

11

Image 13

Contents NP2000 / NP1000 Introduction Page Contents What You Can Do with User Supportware Easy Connection function for connecting wireless LANImage Express Utility What You Can Do with User SupportwareCentral management of the projecting personal computer Click switching of presenterDesktop Control Utility Slideshow start Ulead Photo Explorer 8.0 SE BasicPC Control Utility Viewer PPT ConverterSupported Projector Operating EnvironmentOperating Environment Operating EnvironmentConnecting LAN Cable Setting card in PC card slot Attaching Wireless LAN CardAttaching Wireless LAN Card Slowly press the PC card eject button once again Removing card from PC card slotSlowly pull out the card Displaying On-Screen Menu LAN Mode Setting the LAN Setting of ProjectorSetting the LAN Setting of Projector Use the button to select the Setup submenu Press the buttonSetting the LAN Setting of Projector Flow of Setting Wireless LANSetting LAN Setting of ProjectorDisplay the PC Card page of LAN Mode Setting Wireless LANSelect Profiles Input IP Address Set DhcpInput Subnet Mask Input DNS ConfigurationInput Gateway Select AdvancedInput or edit Ssid if necessary Select Ssid from Site Survey if necessarySelect Channel if necessary Select Mode if necessarySelect WEP page if necessary Select Key Select only when WEP is selectedSelect WEP Mode Input Key 1 to KeyFinalize Advanced Finalize the settingReconnect the network Wired LAN Display the Built-in page of LAN Mode Setting Wired LANInput IP Address, Subnet Mask, and Gateway Example Wireless LAN of Windows XP Ad Hoc connection Setting the LAN Setting of Personal ComputerClick Windows Start → Control Panel Double-click the Network Connections1Select 2Click Click OK Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Refer to User’s Guide and Help Refer to User’s Guide and HelpClick Viewing User’s Guide Click OK Menu will be displayed Displaying Helps other than Ulead Photo Explorer Using HelpClick in the following order Help Screen Layout Displaying Ulead Photo Explorer 8.0 HelpMemo Memo First edition February NEC Projector User Supportware