NEC NP1000, NP2000 setup guide Wired LAN, Flow of setting

Page 26

5. Setting the LAN Setting of Projector

5-3. Wired LAN

When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the “Built-in” page of “LAN Mode” selected from On-Screen Menu.

■Flow of setting

Step 1 Display "Built-in" page of "LAN Mode".

Step 2 Select "Profiles".

Step 3 Enable or disable "DHCP".

If "Disabled" (without check mark)

If "Enabled" (with check mark)

Step 4 Input "IP Address".

Input "Subnet Mask".

Input "Gateway".

Step 5 Input "DNS Configuration".

Step 6 Reconnect the network.

Step 7 Finalize the setting.

24

Image 26

Contents NP2000 / NP1000 Introduction Page Contents Image Express Utility Easy Connection function for connecting wireless LANWhat You Can Do with User Supportware What You Can Do with User SupportwareClick switching of presenter Central management of the projecting personal computerDesktop Control Utility Ulead Photo Explorer 8.0 SE Basic Slideshow startViewer PPT Converter PC Control UtilityOperating Environment Supported ProjectorOperating Environment Operating EnvironmentConnecting LAN Cable Attaching Wireless LAN Card Attaching Wireless LAN CardSetting card in PC card slot Slowly pull out the card Removing card from PC card slotSlowly press the PC card eject button once again Setting the LAN Setting of Projector Setting the LAN Setting of ProjectorDisplaying On-Screen Menu LAN Mode Use the button to select the Setup submenu Press the buttonSetting the LAN Setting of Projector Setting Wireless LANFlow of Setting LAN Setting of ProjectorSelect Profiles Setting Wireless LANDisplay the PC Card page of LAN Mode Set Dhcp Input IP AddressInput Gateway Input DNS ConfigurationInput Subnet Mask Select AdvancedSelect Ssid from Site Survey if necessary Input or edit Ssid if necessarySelect Mode if necessary Select Channel if necessarySelect WEP Select Key Select only when WEP is selectedSelect WEP page if necessary Input Key 1 to Key ModeReconnect the network Finalize the settingFinalize Advanced Wired LAN Input IP Address, Subnet Mask, and Gateway Setting Wired LANDisplay the Built-in page of LAN Mode Click Windows Start → Control Panel Setting the LAN Setting of Personal ComputerExample Wireless LAN of Windows XP Ad Hoc connection Double-click the Network Connections1Select 2Click Click OK Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Click Viewing User’s Guide Refer to User’s Guide and HelpRefer to User’s Guide and Help Click OK Menu will be displayed Click in the following order Using HelpDisplaying Helps other than Ulead Photo Explorer Displaying Ulead Photo Explorer 8.0 Help Help Screen LayoutMemo Memo First edition February NEC Projector User Supportware