NEC NP2000, NP1000 setup guide What You Can Do with User Supportware, Image Express Utility

Page 5

1.What You Can Do with User Supportware 3

1.What You Can Do with User Supportware 3

1-1. Image Express Utility 2.0

Image Express Utility 2.0 is a software tool used to send the screen of your personal computer to the projector via a network, without the signal cables.

High-speed, high-quality image transmissions based on NEC’s original compression algorithm

NEC’s original compression algorithm allows high-quality images to be sent over the network at high speed, from your personal computer to the projector.

Simultaneous projection by multiple projectors

Images can be sent from a personal computer to not only one projector but also to two or more projectors at the same time.

”Easy Connection” function for connecting wireless LAN

By using “Easy Connection” function*1, the complicated setting of wireless LAN can be

simplified.

*1 This function can be used when Windows XP is used as the OS and when you have a “Computer Administrator” privilege. The communication mode is set to “802.11 Ad Hoc”.

The “Easy Connection” function cannot be used with Windows 2000.

1

What You Can Do with User Supportware 3

3

Image 5
Contents NP2000 / NP1000 Introduction Page Contents What You Can Do with User Supportware Easy Connection function for connecting wireless LANImage Express Utility What You Can Do with User SupportwareCentral management of the projecting personal computer Click switching of presenterDesktop Control Utility Slideshow start Ulead Photo Explorer 8.0 SE BasicPC Control Utility Viewer PPT ConverterSupported Projector Operating EnvironmentOperating Environment Operating EnvironmentConnecting LAN Cable Attaching Wireless LAN Card Attaching Wireless LAN CardSetting card in PC card slot Slowly pull out the card Removing card from PC card slotSlowly press the PC card eject button once again Displaying On-Screen Menu LAN Mode Setting the LAN Setting of ProjectorSetting the LAN Setting of Projector Use the button to select the Setup submenu Press the buttonSetting the LAN Setting of Projector Flow of Setting Wireless LANSetting LAN Setting of ProjectorSelect Profiles Setting Wireless LANDisplay the PC Card page of LAN Mode Input IP Address Set DhcpInput Subnet Mask Input DNS ConfigurationInput Gateway Select AdvancedInput or edit Ssid if necessary Select Ssid from Site Survey if necessarySelect Channel if necessary Select Mode if necessarySelect WEP Select Key Select only when WEP is selectedSelect WEP page if necessary Mode Input Key 1 to KeyReconnect the network Finalize the settingFinalize Advanced Wired LAN Input IP Address, Subnet Mask, and Gateway Setting Wired LANDisplay the Built-in page of LAN Mode Example Wireless LAN of Windows XP Ad Hoc connection Setting the LAN Setting of Personal ComputerClick Windows Start → Control Panel Double-click the Network Connections1Select 2Click Click OK Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Click Viewing User’s Guide Refer to User’s Guide and HelpRefer to User’s Guide and Help Click OK Menu will be displayed Click in the following order Using HelpDisplaying Helps other than Ulead Photo Explorer Help Screen Layout Displaying Ulead Photo Explorer 8.0 HelpMemo Memo First edition February NEC Projector User Supportware