NEC NP1000, NP2000 Setting Wireless LAN, Display the PC Card page of LAN Mode, Select Profiles

Page 18

5. Setting the LAN Setting of Projector

■Setting Wireless LAN

1Display the “PC Card” page of “LAN Mode”.

Configure the setting of wireless LAN in the "PC Card” page of “LAN Mode” selected from On-Screen Menu.

<1> In the “LAN Mode” setting window, if the “Built-in” tab is highlighted, press the button to highlight “PC Card”.

The “PC Card” page will be displayed.

•If “LAN Mode” is not displayed, refer to “5-1. Displaying On-Screen Menu (LAN Mode)” (page 13).

2Select “Profiles”.

<1>

Press the

SELECT

button once to highlight the “Profiles” field and press the

button.

<2>

Use the

SELECT /

button to highlight “Profile 1”, and press the

button.

•“Profile 1” or “Profile 2” can be stored in the memory of the projector as the setting for LAN.

•“Easy Connection” is a mode in which the personal computer that runs Image Express Utility 2.0 in the User Supportware 3 CD-ROM is easily connected to wireless LAN.

Note that “Easy Connection” does not support software other than Image Express Utility 2.0.

•When “Easy Connection” is selected, the IP address and subnet mask do not have to be set. To use “Easy Connection”, the OS of the personal computer must be Windows XP ([Computer Administrator] privilege). It cannot be used with Windows 2000.

The communication mode is “802.11 Ad Hoc”.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents NP2000 / NP1000 Introduction Page Contents Image Express Utility Easy Connection function for connecting wireless LANWhat You Can Do with User Supportware What You Can Do with User SupportwareClick switching of presenter Central management of the projecting personal computerDesktop Control Utility Ulead Photo Explorer 8.0 SE Basic Slideshow startViewer PPT Converter PC Control UtilityOperating Environment Supported ProjectorOperating Environment Operating EnvironmentConnecting LAN Cable Attaching Wireless LAN Card Setting card in PC card slotAttaching Wireless LAN Card Removing card from PC card slot Slowly press the PC card eject button once againSlowly pull out the card Setting the LAN Setting of Projector Setting the LAN Setting of ProjectorDisplaying On-Screen Menu LAN Mode Use the button to select the Setup submenu Press the buttonSetting the LAN Setting of Projector Setting Wireless LANFlow of Setting LAN Setting of ProjectorSetting Wireless LAN Display the PC Card page of LAN ModeSelect Profiles Set Dhcp Input IP AddressInput Gateway Input DNS ConfigurationInput Subnet Mask Select AdvancedSelect Ssid from Site Survey if necessary Input or edit Ssid if necessarySelect Mode if necessary Select Channel if necessarySelect Key Select only when WEP is selected Select WEP page if necessarySelect WEP Input Key 1 to Key ModeFinalize the setting Finalize AdvancedReconnect the network Wired LAN Setting Wired LAN Display the Built-in page of LAN ModeInput IP Address, Subnet Mask, and Gateway Click Windows Start → Control Panel Setting the LAN Setting of Personal ComputerExample Wireless LAN of Windows XP Ad Hoc connection Double-click the Network Connections1Select 2Click Click OK Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Refer to User’s Guide and Help Refer to User’s Guide and HelpClick Viewing User’s Guide Click OK Menu will be displayed Using Help Displaying Helps other than Ulead Photo ExplorerClick in the following order Displaying Ulead Photo Explorer 8.0 Help Help Screen LayoutMemo Memo First edition February NEC Projector User Supportware
Top Page Image Contents