Introduction
Thank you for purchasing the NEC projector NP2000/NP1000 (hereafter referred to as the “projector”).
The projector is equipped with the following features so that you can give effective presentations.
•LAN port
•Viewer that displays images from a flash memory card*1 and USB memory*1
•Wireless LAN card supplied as an option*2
*1 The projector is not supplied with a flash memory card or USB memory.
*2 For a list of countries where NEC’s optional wireless LAN card
The projector is also supplied with User Supportware 3
Each program runs on Windows XP and Windows 2000.
Install in the PC the software in the User Supportware 3
•Image Express Utility 2.0
•Desktop Control Utility 1.0
•Ulead Photo Explorer 8.0 SE Basic
•Viewer PPT Converter 3.0
•PC Control Utility 3.0
This document explains how to configure the LAN settings to use the above software programs. For details of operations, refer to “User Supportware 3 User’s Guide” on User Supportware 3
For the network settings on the personal computer, refer to the User’s Manual for the personal computer or the peripheral equipment for the network.
Use a wireless LAN card conforming to the
NOTES
(1)The contents of this guide may not be reprinted in part or whole without permission.
(2)The contents of this guide are subject to change without notice.
(3)Great care has been taken in the preparation of this guide; however, should you notice any questionable points, errors or omissions, please contact us.
(4)Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.
(5)Guides with incorrect collating or missing pages will be replaced.