NEC NP1000, NP2000 Input Subnet Mask, Input Gateway, Input DNS Configuration, Select Advanced

Page 20

5. Setting the LAN Setting of Projector

5Input “Subnet Mask”.

If “DHCP” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “IP Address” field.

6Input “Gateway”.

If “DHCP” is not checked, input the default gateway of the network to which the projector is connected. The method of inputting is the same as that of the “IP Address” field.

7Input “DNS Configuration”.

Set the IP address of the DNS server of the network to which the projector is connected. The method of inputting is the same as that of the “IP Address” field.

Example of setting 1

8Select “Advanced”.

Set “Network Type” and “WEP” (encryption) specific to wireless LAN.

<1> Use the SELECT / button to highlight “Advanced” on the “PC Card” page and press the

button.

The “Advanced” screen will be displayed.

18

Image 20
Contents NP2000 / NP1000 Introduction Page Contents Easy Connection function for connecting wireless LAN What You Can Do with User SupportwareImage Express Utility What You Can Do with User SupportwareClick switching of presenter Central management of the projecting personal computerDesktop Control Utility Ulead Photo Explorer 8.0 SE Basic Slideshow startViewer PPT Converter PC Control UtilityOperating Environment Supported ProjectorOperating Environment Operating EnvironmentConnecting LAN Cable Attaching Wireless LAN Card Attaching Wireless LAN CardSetting card in PC card slot Slowly pull out the card Removing card from PC card slotSlowly press the PC card eject button once again Setting the LAN Setting of Projector Displaying On-Screen Menu LAN ModeSetting the LAN Setting of Projector Use the button to select the Setup submenu Press the buttonSetting the LAN Setting of Projector Wireless LAN Flow of SettingSetting LAN Setting of ProjectorSelect Profiles Setting Wireless LANDisplay the PC Card page of LAN Mode Set Dhcp Input IP AddressInput DNS Configuration Input Subnet MaskInput Gateway Select AdvancedSelect Ssid from Site Survey if necessary Input or edit Ssid if necessarySelect Mode if necessary Select Channel if necessarySelect WEP Select Key Select only when WEP is selectedSelect WEP page if necessary Input Key 1 to Key ModeReconnect the network Finalize the settingFinalize Advanced Wired LAN Input IP Address, Subnet Mask, and Gateway Setting Wired LANDisplay the Built-in page of LAN Mode Setting the LAN Setting of Personal Computer Example Wireless LAN of Windows XP Ad Hoc connectionClick Windows Start → Control Panel Double-click the Network Connections1Select 2Click Click OK Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Click Viewing User’s Guide Refer to User’s Guide and HelpRefer to User’s Guide and Help Click OK Menu will be displayed Click in the following order Using HelpDisplaying Helps other than Ulead Photo Explorer Displaying Ulead Photo Explorer 8.0 Help Help Screen LayoutMemo Memo First edition February NEC Projector User Supportware