NEC NP2000, NP1000 setup guide Wireless LAN, Flow of Setting, LAN Setting of Projector

Page 17

Step 3

Step 2

Step 1

5. Setting the LAN Setting of Projector

5-2. Wireless LAN

When inserting the wireless LAN card into the PC card slot of the projector, configure the LAN settings in the “PC Card” page of “LAN Mode” selected from On-Screen Menu.

■Flow of Setting

Display "PC Card" page of "LAN Mode".

Select "Profiles".

Enable or disable "DHCP".

If "Disabled" (without check mark)

If "Enabled" (with check mark)

Step 4 Input "IP Address".

Step 5 Input "Subnet Mask".

Step 6 Input "Gateway".

Step 7 Input "DNS Configuration".

Step 8 - 16 Setting of "Advanced".

8Setting of "Network Type".

9Select SSID in "Site Survey".

If "Easy Connection" is selected

13Setting of "WEP"

14Select the number of bits of "WEP".

5

Setting the

10	Input "SSID" (if necessary).	15	Select "Key Select".
11	Select "Mode" (if necessary).	16	Set "Key 1 to Key 4".

12Select "Channel" (if necessary).

Step 17 Finalize "Advanced".

Step 18 Reconnect the network.

Step 19 Finalize the setting.

LAN Setting of Projector

15

Image 17

Contents NP2000 / NP1000 Introduction Page Contents What You Can Do with User Supportware Easy Connection function for connecting wireless LANImage Express Utility What You Can Do with User SupportwareCentral management of the projecting personal computer Click switching of presenterDesktop Control Utility Slideshow start Ulead Photo Explorer 8.0 SE BasicPC Control Utility Viewer PPT ConverterSupported Projector Operating EnvironmentOperating Environment Operating EnvironmentConnecting LAN Cable Attaching Wireless LAN Card Attaching Wireless LAN CardSetting card in PC card slot Slowly pull out the card Removing card from PC card slotSlowly press the PC card eject button once again Displaying On-Screen Menu LAN Mode Setting the LAN Setting of ProjectorSetting the LAN Setting of Projector Use the button to select the Setup submenu Press the buttonSetting the LAN Setting of Projector Flow of Setting Wireless LANSetting LAN Setting of ProjectorSelect Profiles Setting Wireless LANDisplay the PC Card page of LAN Mode Input IP Address Set DhcpInput Subnet Mask Input DNS ConfigurationInput Gateway Select AdvancedInput or edit Ssid if necessary Select Ssid from Site Survey if necessarySelect Channel if necessary Select Mode if necessarySelect WEP Select Key Select only when WEP is selectedSelect WEP page if necessary Mode Input Key 1 to KeyReconnect the network Finalize the settingFinalize Advanced Wired LAN Input IP Address, Subnet Mask, and Gateway Setting Wired LANDisplay the Built-in page of LAN Mode Example Wireless LAN of Windows XP Ad Hoc connection Setting the LAN Setting of Personal ComputerClick Windows Start → Control Panel Double-click the Network Connections1Select 2Click Click OK Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Click Viewing User’s Guide Refer to User’s Guide and HelpRefer to User’s Guide and Help Click OK Menu will be displayed Click in the following order Using HelpDisplaying Helps other than Ulead Photo Explorer Help Screen Layout Displaying Ulead Photo Explorer 8.0 HelpMemo Memo First edition February NEC Projector User Supportware