JBL SCS135P manual Playing CDs, Playing MP3 and Video CD Discs, Selecting a Track, Using IntroScan

Operating the DVD600II DVD Changer

2.Press the ‹/ › Buttons ` until the camera icon with the letters “Ang” below it (fifth from the left) is highlighted in white between yellow brackets.

3.Press the Enter Button .

4.Note that the main Menu Bar will be replaced with a single display of the angle number (Figure 21).

Figure 21

5.Press the Enter Button until the desired angle is shown. Note that the number of angles available is set by the disc’s producer, not the DVD600II, and it may vary from disc to disc.

You may also change the angle directly by

pressing the Angle Button when multiple angles are present, until the desired angle appears on the screen.

Playing CDs

The DVD600II allows you to take advantage of the on-screen Menu Bar even when playing CDs. The use of this graphical display makes it easy to select CD Functions.

When a CD is playing, the Menu Bar will auto- matically appear in your video display, even though there is no video on the CD itself. To remove the Menu Bar at any time, press the

Clear Button . If the Menu Bar is not pres- ent, press the Status Button e to have it appear on the screen (Figure 22).

Figure 22

Track: The number shown indicates the number of the track that is currently playing.

IntroScan: When the IntroScan feature is active, the musical notes in this icon will change.

Bookmarks: Highlight this area and press enter to enter or go to bookmarked locations on a disc.

Time Display Type: This shows the type of

time indication being shown: Time Remaining for the Current Track, Total Elapsed for the Disc, or Total Remaining for the Disc.

Disc Type: Shows the type of disc being played.

Disc Number: The slot number of the disc being played is shown.

Time Indicator: The time indication selected is shown.

Once the Menu Bar appears, press the ‹/ › Buttons ` to move across the display to select the desired option. When the option to be changed is highlighted, press the Enter

Button to change the setting for that option.

Selecting a Track

To select any track on a CD, follow these steps:

Enter the track number while the disc is playing or in Pause mode by entering its number, or:

1.During disc playback, press the Status Button e if the Menu Bar is not already on the screen.

2.If needed, press the ‹/ › Buttons ` until the disc icon with the letter “T” underneath it is highlighted in white between yellow brackets.

3.Press the Enter Button .

4.Note that the number to the right of the “T” will be replaced with two dashes (– –).

5.Using the Numeric Keys – , enter the number of the track to be accessed.

6.The desired title will automatically be started.

Using IntroScan

The IntroScan feature allows you to sample the tracks on a CD by playing the first ten seconds of each track and then moving to the next track. To use IntroScan, follow these steps:

1.During disc playback, press the Status Button e if the Menu Bar is not already on the screen.

2.If needed, press the ‹/ › Buttons ` until the musical score icon with the phrase “IntroScan” underneath it (second from the left) is highlighted.

3.Press the Enter Button .

4.Note that the disc will immediately begin to play the first track on the disc and the musical notes in the icon will change and flash.

5.The unit will play the first ten seconds of each track on the disc, moving from one track to the next.

6.To play a track during IntroScan, press the

Play/Pause Button .

7.If no track is selected, the disc will stop play- ing when it has played the first ten seconds of each track in order.

Note that while the IntroScan feature is in use,

the Intro Indicator will appear in the

Information Display .

Time Display Selection

When playing CDs, the DVD600II is capable of displaying the time displays that you are famil- iar with from traditional CD-only players. The choice of a time display is made through the use of the on-screen Menu Bar, but any changes to the display will also change the Time Display mode for the Information Display.

To change the time display during CD playback, follow these steps:

1.During disc playback, press the Status Button e if the Menu Bar is not already on the screen.

2.If needed, press the ‹/ › Buttons ` until the clock icon with the word “Time” next to it is highlighted.

3.Press the Enter Button to select one of these four choices. Each press of the button will select the next option:

•Track Elapsed: This shows the time that has elapsed for the current track. At the start of each track this display will reset to zero and begin to count up again.

•Track Remain: This shows the time remaining for the current track. At the start of each track the time will begin to count down again, starting with the total time of the track.

•Disc Elapsed: This shows the total time that the current disc has played for all tracks.

•Disc Remain: This shows the total time remaining for all tracks on the disc that have not yet been played.

Playing MP3 and Video CD Discs

The DVD600II is rare among DVD players in that it is able to play discs containing MP3 audio files. This means that you may enjoy the latest music, using discs created in your computer, through the high quality audio components in your home theater system. As the way that MP3 files are recorded on discs differs from the way conventional CD audio discs are structured, MP3 playback is somewhat different from standard CDs.

60