JBL DVD600II, SCS135P manual DCR600II Front Panel Information Display, Channel Stereo Lights when

Page 16

DCR600II Front Panel Information Display

96KHz 192KHz

ABitstream Indicators: When the input is a digital source, these indicators display the specific type of data signal. The DCR600II will also indicate when it detects a digital signal with a resolution of either 96kHz or 192kHz. This can occur when the receiver is used with an external DVD-Audio player or other device that is capable of transmitting this type of sig- nal. You should not expect to see these indica- tors light when using the DVD600II as your source unit.

BOptical Source: Indicates the Optical Digital Input has been selected.

CDTS: Indicates a DTS-encoded source.

DDolby Digital: Indicates a Dolby Digital source.

ECoaxial Source: Indicates a Coaxial Digital Input.

FDolby Pro Logic II: Indicates a Dolby Pro Logic II mode has been selected. Either

DOLBY PRO LOGIC II – MOVIES or DOLBY PRO LOGIC II – MUSIC or DOLBY PRO LOGIC II – EMULATION will scroll on the Main Information Display U, depending on the mode selected.

GAnalog Input: Indicates an analog input source.

NOTE: Analog audio input is not available when the DVD input is in use.

HDolby 3 Stereo Indicator: This indicator lights when the Dolby 3 Stereo mode has been selected.

ILogic 7 Mode: Indicates that the Logic 7 mode is in use. LOGIC 7C appears for the Cinema version of Logic 7; LOGIC 7M appears for the Music version of Logic 7.

J5-Channel Stereo: Lights when the

5-Channel Stereo mode has been selected.

KHall Mode: Lights when one of the two Hall modes has been selected.

LTheater Mode: Indicates that the Theater mode has been selected.

MSpeaker/Channel Input: These indicators are multipurpose, indicating either the speaker type selected for each channel or the incoming data-signal configuration. The left, center, right, right surround and left surround speaker indicators are composed of three boxes, while the subwoofer is a single box. The center box lights when a “Small” speaker is selected, and all three boxes light when “Large” speakers are selected. When none of the boxes are lit for the center, surround or subwoofer channels, no speaker has been selected for one of those positions. The letters inside each of the center boxes display active input channels. For stan- dard analog inputs, only the L and R will light, indicating a stereo input. When a digital source is playing, the indicators will light to display the channels being received at the digi- tal input. When the letters flash, the digital input has been interrupted.

NPreset Number/Sleep Timer: In Tuner mode, these numbers indicate the preset mem- ory location in use. In Sleep function mode, it shows the number of minutes remaining before the unit goes into the Standby mode.

OPreset Indicator: This indicator lights when the tuner is in use to show that the Preset Number/Sleep Timer N is showing the station’s preset memory number.

PSleep Indicator: This indicator lights when the Sleep function is in use.

QMemory: Flashes when entering presets and other information into the tuner’s memory.

RStereo: Lights when an FM station is being tuned in stereo.

STuned: Lights when a station is being received with sufficient signal strength to pro- vide acceptable listening quality.

TAuto: Lights when the tuner is in Auto mode.

UMain Information Display: Shows mes- sages relating to the status, input source, sur- round mode, tuner, volume level or other aspects of operation.

VMute: Lights to indicate that the unit has been put in Mute by pressing the Mute Button c. Press the Mute Button c again to return to the previously selected output level.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents N E R ’ S G U I D E Repeat Playback of MP3 Discs Re a d f i rs t ! Important Safety Precautions Important Safety Information Installing and Connecting the Equipment Getting StartedThank You for Choosing JBL What‘s IncludedQuick Installation Diagrams DVD600IIGray Blue Gray Blue Green Red White Where to Place the Speakers Mounting Options Satellites and SurroundsWall-Mounting Center Channel SpeakerConnecting the Speakers Audio ConnectionsMaking the Video Connections Completing SetupConnect one end of an S-Video cable not sup Quick Guide to Using the JBL Cinema ProPack Surround Mode Selector t7 to scroll Set ButtonButtons y ButtonDCR600II Front Panel Controls Digital Input Selector When playing a So that the Auto IndicatorFM Tuning Mode Button @ Stereo Indicator R goes outStereo Lights when an FM station is being tuned in stereo Auto Lights when the tuner is in Auto modeDCR600II Front Panel Information Display Coaxial Source Indicates a Coaxial Digital InputDCR600II Rear Panel Connections CD Inputs Connect to output of a CD playerPage Power Indicator surrounding System Power Control WhenDVD600II Front Panel Controls Play Button Open/Close Button Press to open orPlayback Mode Lights to show the cur- rent playback mode › Lights when a disc is playing in the Normal mode›± Lights when the disc is paused DVD600II Front Panel Information DisplayDVD600II Rear Panel Connections Remote Control Output Connect thisComposite Video Output Connect this Remote Control Functions It will select DVD as the input sourceVolume Fg M1 and M2 Macro Buttons/OpenVideo 2 Input Selector VCR 2 Press Channel Direct Input ∞ as the inputTo select the channel being adjusted Set Button to lock in the settingTuning Up/Down/Step Frame Nal is weak will change to monaural receptionPreset Up/Down/Slow-Play Indicated by the DVD Input Selector dReverse Search/Rewind When Play/Pause ButtonRemote Control Function Grid De v iceRemote Control Function Grid Remote Control Code Tables Remote Control Code Tables VCR Nordmende Catv Catv Satellite Receivers CD Players Receivers Tape DeckDVD Players Configuring the DCR600II Receiver Memory BackupConfiguring the Speakers Press the Set ButtonAdjusting the Output Levels Setting Delay Times To set the delay times, follow these stepsIf only analog sources will be used, no adjust SecondsDelay Time appear in the Main Information Display U Or in the on-screen display Press the Set ButtonM o t e C o n t r o l F u n c t i o n s Programming the RemoteEntering Product Codes Reading Back the Programmed CodeProgramming Macros Press the Input Selector dh jInput Selector dh jl o Press the Macro Button bfg toErasing Macro Commands Volume Control Punch-ThroughPress the Main Selector h Device FunctionsPress the Volume Down Button w. Program Indicator LED will flash onceResetting the Remote Memory Press. The Program Indicator LED will flashN f i g u r i n g t h e D V D 6 0 0II DVD Changer DVD Compatibility TerminologyStop Button twice before contin- uing play On a discConfiguring the DVD600II DVD Changer UsingSelecting Subtitle Languages DVD600II is turned on in two stepsParental Lock and Passwords By using the Subtitle ButtonSelecting Menu Languages ⁄/ ¤ Buttons y until the desired rangeChanging the Password Clearing Passwords¤ Button KeysSetting the Aspect Ratio Setting the Dynamic RangeUsing the Digital Audio Output Setting the Linear PCM Bit RateMain Input Selector h, the Night Button Surround Mode Chart E r a t i n g t h e D C R 6 0 0 II R e c e i v e rSelecting a Surround Mode Operating the DCR600II ReceiverNight Mode Digital Status IndicatorsRangeOff Press the FM Mode Button @ Appear in the Preset Number/Sleep TimerButton @ Until the Stereo Indicator Station SelectionButton . The Status Indicator Operating the DVD600II DVD ChangerLoading Discs Playback BasicsUsing the DVD Disc’s Menu Using the Menu Bar Menus and ControlsSelecting Titles and Chapters Press the Enter ButtonSubtitles. When the Subtitle On/Off Button ‹/ ›/⁄/ ¤ Buttons y`Subtitle On/Off Button Button eUsing IntroScan Playing CDsPlaying MP3 and Video CD Discs Selecting a TrackMP3 Disc Playback Press the ‹/› Navigation Buttons `⁄/¤ Navigation Buttons y ‹/ › Navigation Buttons `Using the On-Screen Status Bar For VCD Playback Playback ControlReverse Buttons on the front panel To view the menu options on a PBC discProgrammed Play Enter Button or › Button to move to the next selection area Return ButtonClear Button Press the Check ButtonDVD Language Codes Language CodeTr o u b l e s h o o t i n g System Power Control to proceedPress Mute Button c Troubleshooting Change Aspect Ratio settings Or Video CD other types will not playDCR600 UseTechnical Specificatio ns Audio Section AM Tuner SectionVideo Section GeneralPlayback Media C h n i c a l Specification sAudio Section Configuration Unit DimensionsUnit Weight ImpedancePower Requirement ContentsCarton Dimensions Shipping Weight

DVD600II, SCS135P, DCR600II specifications

The JBL DCR600II, SCS135P, and DVD600II represent a significant leap in audio performance and versatility from the renowned audio equipment manufacturer, JBL. Each component harmoniously blends cutting-edge technology with engaging design, catering to both home theater enthusiasts and casual listeners.

Starting with the JBL DCR600II, this powerful dual-channel receiver is engineered to deliver exceptional sound quality across a variety of audio formats. Equipped with advanced digital signal processing, the DCR600II enhances audio clarity and fidelity, providing an immersive listening experience. Its Bluetooth connectivity allows users to stream music conveniently from smart devices, while an array of inputs, including HDMI, ensures compatibility with modern video sources. The sleek design of the receiver, coupled with its user-friendly interface, makes it an attractive centerpiece for any home entertainment setup. Furthermore, it supports high-resolution audio formats, ensuring that audiophiles can enjoy their music in the highest quality possible.

Moving on to the SCS135P, this subwoofer is a powerhouse that enhances any home theater system with deep, rich bass tones. With a built-in 200-watt amplifier, the SCS135P can effortlessly reproduce low-frequency sounds, allowing users to feel the excitement of movie soundtracks and music. The compact design fits easily into various spaces, making it a practical choice for versatile room configurations. The subwoofer also features a phase switch and level control, enabling listeners to fine-tune the bass response to their preferences and room acoustics. JBL's innovative driver technology ensures consistent and powerful performance, bringing cinematic audio experiences directly into one’s living room.

Lastly, the JBL DVD600II combines high-quality audio and video performance into a compact package. This DVD player supports a range of formats, including DVD, CD, and various video and audio streaming options. With an easy-to-navigate interface and compatibility with both standard and high-definition content, the DVD600II is designed for easy integration into any entertainment system. Its progressive scan output delivers sharp images with vibrant colors, further elevating the viewing experience. Additionally, the player’s durable build ensures longevity while maintaining high performance.

In conclusion, the JBL DCR600II, SCS135P, and DVD600II work in unison to create a comprehensive audio-visual experience that caters to diverse preferences. Employing cutting-edge technologies and thoughtful design, JBL continues to raise the standard for home entertainment solutions, allowing users to enjoy their favorite content with unmatched clarity and depth. Whether for immersive movie nights or everyday listening, these components stand as a testament to JBL's commitment to quality and performance.
Top Page Image Contents