JBL DVD600II, SCS135P, DCR600II manual Troubleshooting

Page 67

Troubleshooting

No sound from one speaker

• No audio signal is being transmitted

 

to the speakers

•Check all wires and connections between the DCR600II and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

•In Dolby Digital or DTS modes, make sure that the DCR600II is configured so that the speaker in question is enabled.

No sound from surround or

• Incorrect surround mode

• Select a mode other than Stereo.

center speakers

 

• Make sure the movie or TV show you are watching is

 

 

 

 

recorded in a surround sound mode. If it is not, try using

 

 

 

 

another surround mode.

 

 

 

• Input is monaural

• There is no surround information from mono sources.

 

 

 

• Stereo or Mono program material

• The surround decoder may not create center- or rear-channel

 

 

 

 

information from nonencoded programs.

 

 

 

 

• Review the operation of your DVD player and the jacket

 

 

 

 

of your DVD to make sure that the DVD features the desired

 

 

 

 

Dolby Digital or DTS mode, and that you have properly

 

 

 

 

selected that mode using both the DVD player’s menu and

 

 

 

 

the DVD disc’s menu.

 

 

 

 

 

 

 

 

 

• No audio signal is being transmitted

• Check all wires and connections between the DCR600II and

 

 

 

to the speaker

speaker. Make sure all wires are connected. Make sure

 

 

 

 

none of the speaker wires are frayed, cut or punctured.

 

 

 

• Incorrect configuration

• If the DCR600II is set in Dolby Pro Logic II mode, make sure

 

 

 

 

the center speaker is not in Phantom mode.

 

 

 

 

• If the DCR600II is set in Dolby Digital or DTS mode, make

 

 

 

 

sure it is configured so that the center speaker is enabled.

 

 

 

 

• In Dolby Digital or DTS modes, make sure the DCR600II is

 

 

 

 

configured so that the surround speakers are enabled.

 

 

 

 

• Check all wires and connections between the DCR600II and

 

 

 

 

speakers. Make sure all wires are connected. Make sure

 

 

 

 

none of the speaker wires are frayed, cut or punctured.

System plays at low volume but shuts off as volume is increased

•Speaker impedances are dropping too low for receiver to handle

•Check all wires and connections between the DCR600II and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

•Do not use more than one pair of main speakers.

Low (or no) bass output

• Speakers are connected out of phase

• Make sure the connections to the left and right

 

 

Speaker Inputs have the correct polarity (+ and –).

 

• Subwoofer output of DCR600II not

• In Dolby Digital or DTS modes, make sure the DCR600II is

 

enabled

configured so that the subwoofer and LFE output is enabled.

 

 

 

Unit does not respond to

• Weak batteries in remote

• Change remote batteries.

remote commands

• Wrong device selected

• Press the Main h or DVD d selector.

 

• Remote sensor is obscured

• Make certain front panel sensor is visible to remote

 

 

or connect remote sensor.

 

 

 

 

 

Intermittent buzzing in tuner

• Local interference

• Move unit or antenna away from computers,

fluorescent

 

 

lights, motors or other electrical appliances.

 

 

 

 

 

Letters flash in the channel indicator

• Digital audio feed paused

• Resume play for DVD.

 

display and digital audio stops

 

• Check that Digital Input is selected.

 

 

 

 

 

 

 

(continued)

67

Page 66 Page 68
Image 67
Page 66 Page 68
Contents N E R ’ S G U I D E Repeat Playback of MP3 Discs Re a d f i rs t ! Important Safety Precautions Important Safety Information What‘s Included Installing and Connecting the EquipmentGetting Started Thank You for Choosing JBLDVD600II Quick Installation DiagramsGray Blue Gray Blue Green Red White Center Channel Speaker Where to Place the SpeakersMounting Options Satellites and Surrounds Wall-MountingAudio Connections Connecting the SpeakersMaking the Video Connections Completing SetupConnect one end of an S-Video cable not sup Quick Guide to Using the JBL Cinema ProPack Button Surround Mode Selector t7 to scrollSet Button Buttons yDCR600II Front Panel Controls Stereo Indicator R goes out Digital Input Selector When playing aSo that the Auto Indicator FM Tuning Mode Button @Coaxial Source Indicates a Coaxial Digital Input Stereo Lights when an FM station is being tuned in stereoAuto Lights when the tuner is in Auto mode DCR600II Front Panel Information DisplayCD Inputs Connect to output of a CD player DCR600II Rear Panel ConnectionsPage Play Button Open/Close Button Press to open or Power Indicator surroundingSystem Power Control When DVD600II Front Panel ControlsDVD600II Front Panel Information Display Playback Mode Lights to show the cur- rent playback mode› Lights when a disc is playing in the Normal mode ›± Lights when the disc is pausedDVD600II Rear Panel Connections Remote Control Output Connect thisComposite Video Output Connect this It will select DVD as the input source Remote Control FunctionsChannel Direct Input ∞ as the input VolumeFg M1 and M2 Macro Buttons/Open Video 2 Input Selector VCR 2 PressNal is weak will change to monaural reception To select the channel being adjustedSet Button to lock in the setting Tuning Up/Down/Step FramePlay/Pause Button Preset Up/Down/Slow-PlayIndicated by the DVD Input Selector d Reverse Search/Rewind WhenDe v ice Remote Control Function GridRemote Control Function Grid Remote Control Code Tables Remote Control Code Tables VCR Nordmende Catv Catv Satellite Receivers CD Players Tape Deck ReceiversDVD Players Press the Set Button Configuring the DCR600II ReceiverMemory Backup Configuring the SpeakersAdjusting the Output Levels Seconds Setting Delay TimesTo set the delay times, follow these steps If only analog sources will be used, no adjustOr in the on-screen display Press the Set Button Delay Time appear in the Main Information Display UReading Back the Programmed Code M o t e C o n t r o l F u n c t i o n sProgramming the Remote Entering Product CodesPress the Macro Button bfg to Programming MacrosPress the Input Selector dh j Input Selector dh jl oDevice Functions Erasing Macro CommandsVolume Control Punch-Through Press the Main Selector hPress. The Program Indicator LED will flash Press the Volume Down Button w.Program Indicator LED will flash once Resetting the Remote MemoryOn a disc N f i g u r i n g t h e D V D 6 0 0II DVD ChangerDVD Compatibility Terminology Stop Button twice before contin- uing playDVD600II is turned on in two steps Configuring the DVD600II DVD ChangerUsing Selecting Subtitle Languages⁄/ ¤ Buttons y until the desired range Parental Lock and PasswordsBy using the Subtitle Button Selecting Menu LanguagesKeys Changing the PasswordClearing Passwords ¤ ButtonSetting the Dynamic Range Setting the Aspect RatioUsing the Digital Audio Output Setting the Linear PCM Bit RateMain Input Selector h, the Night Button E r a t i n g t h e D C R 6 0 0 II R e c e i v e r Surround Mode ChartOperating the DCR600II Receiver Selecting a Surround ModeNight Mode Digital Status IndicatorsRangeOff Station Selection Press the FM Mode Button @Appear in the Preset Number/Sleep Timer Button @ Until the Stereo IndicatorPlayback Basics Button . The Status IndicatorOperating the DVD600II DVD Changer Loading DiscsUsing the DVD Disc’s Menu Press the Enter Button Using the Menu BarMenus and Controls Selecting Titles and ChaptersButton e Subtitles. When the Subtitle On/Off Button‹/ ›/⁄/ ¤ Buttons y` Subtitle On/Off ButtonSelecting a Track Using IntroScanPlaying CDs Playing MP3 and Video CD Discs‹/ › Navigation Buttons ` MP3 Disc PlaybackPress the ‹/› Navigation Buttons ` ⁄/¤ Navigation Buttons yTo view the menu options on a PBC disc Using the On-Screen Status Bar For VCD PlaybackPlayback Control Reverse Buttons on the front panelProgrammed Play Press the Check Button Enter Button or › Button to move to the next selection areaReturn Button Clear ButtonLanguage Code DVD Language CodesTr o u b l e s h o o t i n g System Power Control to proceedPress Mute Button c Troubleshooting Use Change Aspect Ratio settingsOr Video CD other types will not play DCR600General Technical Specificatio nsAudio Section AM Tuner Section Video SectionPlayback Media C h n i c a l Specification sAudio Section Impedance ConfigurationUnit Dimensions Unit WeightShipping Weight Power RequirementContents Carton Dimensions

DVD600II, SCS135P, DCR600II specifications

The JBL DCR600II, SCS135P, and DVD600II represent a significant leap in audio performance and versatility from the renowned audio equipment manufacturer, JBL. Each component harmoniously blends cutting-edge technology with engaging design, catering to both home theater enthusiasts and casual listeners.

Starting with the JBL DCR600II, this powerful dual-channel receiver is engineered to deliver exceptional sound quality across a variety of audio formats. Equipped with advanced digital signal processing, the DCR600II enhances audio clarity and fidelity, providing an immersive listening experience. Its Bluetooth connectivity allows users to stream music conveniently from smart devices, while an array of inputs, including HDMI, ensures compatibility with modern video sources. The sleek design of the receiver, coupled with its user-friendly interface, makes it an attractive centerpiece for any home entertainment setup. Furthermore, it supports high-resolution audio formats, ensuring that audiophiles can enjoy their music in the highest quality possible.

Moving on to the SCS135P, this subwoofer is a powerhouse that enhances any home theater system with deep, rich bass tones. With a built-in 200-watt amplifier, the SCS135P can effortlessly reproduce low-frequency sounds, allowing users to feel the excitement of movie soundtracks and music. The compact design fits easily into various spaces, making it a practical choice for versatile room configurations. The subwoofer also features a phase switch and level control, enabling listeners to fine-tune the bass response to their preferences and room acoustics. JBL's innovative driver technology ensures consistent and powerful performance, bringing cinematic audio experiences directly into one’s living room.

Lastly, the JBL DVD600II combines high-quality audio and video performance into a compact package. This DVD player supports a range of formats, including DVD, CD, and various video and audio streaming options. With an easy-to-navigate interface and compatibility with both standard and high-definition content, the DVD600II is designed for easy integration into any entertainment system. Its progressive scan output delivers sharp images with vibrant colors, further elevating the viewing experience. Additionally, the player’s durable build ensures longevity while maintaining high performance.

In conclusion, the JBL DCR600II, SCS135P, and DVD600II work in unison to create a comprehensive audio-visual experience that caters to diverse preferences. Employing cutting-edge technologies and thoughtful design, JBL continues to raise the standard for home entertainment solutions, allowing users to enjoy their favorite content with unmatched clarity and depth. Whether for immersive movie nights or everyday listening, these components stand as a testament to JBL's commitment to quality and performance.
Top Page Image Contents