Epson ELP-820, ELP-811, ELP-600, ELP-800UG, ELP-810UG, EMP-810UG manual Rear, Part Names and Functions

Part Names and Functions

Rear

• Audio Out port (P.34)	• Monitor Out port (P.28)
Outputs the audio signal being input to	Outputs the projected analog video signal
the projector.	from a computer to an external monitor.
* If a stereo mini jack is connected here,	This is not available for digital video signals
the sound stops coming out from the	being input to the Computer 1 port or signals
projector's built-in speaker.	from other video sources.

•Control (RS-232C) port (P.105)

Connects the projector to a computer	• Computer 2/Component Video port
using an RS-232C cable.	(P.20)
• Mouse port (P.25)	Inputs analog video signals from a
Connects the projector to a computer	computer and component video signals
	from other video sources.
via the accessory PS/2 mouse cable
when using the remote control as a
wireless mouse.	• Computer 1 port (P.21)
• USB port (P.24, 26, 105)
	Inputs digital/analog RGB video
Connects the projector to a	signals from a computer.
computer or USB equipment via
the accessory USB cable.

•Remote control receiver (P.14)

Receives signals from the remote control.

•Speaker

•	Power inlet
	(P.36)
	Connects the
	power cord.			•	Audio 1 port (P.24)
•	Rear adjustable foot (P.42)				Inputs audio signals.
	Extend and retract to adjust the				Connects using a stereo mini jack.
	horizontal projection angle. At the time			•	Audio 2 port (P.24)
	of purchase, there is packing attached to
	the rear adjustable foot. Remove this				Inputs audio signals. Use the
	packing before using the projector.				accessory A/V cable for this
•					connection.
	Remote port (P.100)			•
	Connects an optional	•	S-Video port (P.30)		Video port (P.29)
	remote control receiver to				Inputs composite video signals to the
	the projector.		Inputs an S-Video signal to		projector from other video sources.
			the projector from other		Use the accessory A/V cable for this
			video sources.		connection.

10