Epson ELP-811, ELP-600, ELP-800UG When tilted vertically, When tilted horizontally, Approx above

If the projector cannot be set up so that it is perpendicular to the screen, you can use the keystone correction function which is described on the following page to adjust the projected images if the angle of the projector is within a range of approximately 30° vertically or approximately 10° horizontally from the perpendicular.

The values given here are for when the image is at the smallest zoom setting (telephoto). The maximum angles will be smaller if the zoom setting has been increased in the wide angle direction. Furthermore, if the projector has been tilted both vertically and horizontally, the maximum adjustable angle will again be smaller than the maximum angle if the projector had been tilted in only one direction.

• When tilted vertically

Approx. 30° above Approx. 30° below

30°

30°

• When tilted horizontally

Approx. 10° to the right	Approx. 10° to the left
	10°

10°

43