Epson ELP-811 Installation, Setting Up the Projector, Front projection Front/ceiling projection

Page 18

Installation

Setting Up the Projector

The projector supports the following four different projection methods, allowing you to choose the best method for displaying your images.

When setting up the projector, be sure to first read the Safety Instructions/ World-Wide Warranty Terms for information on the safety precautions that must be observed at this time.

• Front projection

• Front/ceiling projection

*A special method of installation is required in order to suspend the projector from the ceiling. Please contact the place of purchase if you would like to use this installation method.

Image 18

Contents Page Meaning of unit and projector Safety Instructions/World-Wide Warranty TermsGeneral information User’s Guide this manualUnpacking the Projector DocumentationFeatures of the Projector Horizontal and vertical keystone correction functionBrilliant, Attractive Images Contents 103 100101 106Page Connecting to a Video Source Before Using the Remote ControlConnecting to a Computer Connecting to an External SpeakerPart Names and Functions Front/TopControl panel Rear Part Names and FunctionsFront adjustable foot Air filter air inlet P.92 BaseSuspension bracket fixing points 4 points Remote control Before Using the Remote Control Battery Replacement Period and CautionsInserting the Batteries Remote Operating Range Using the Remote Control and Remote Operating RangeUsing the Remote Control Operating distance Operating angleApprox Remote control transmitter Approx. ±15 vertically Approx Approx When suspended from the ceilingApprox. ±30 Horizontally Installation Setting Up the ProjectorFront projection Front/ceiling projection Page Recommended distance InstallationScreen Size and Projection Distance Screen size cm ft Approximate projection distance* m ftConnecting to a Computer Eligible ComputersProjecting Images from the Computer When connecting to the Computer 2/Component Video portAccessory If the monitor port is a mini D-Sub 15-pin portIf the monitor port is a digital RGB connector If the monitor port is a 5BNC port To monitor port Computer cable To Computer OptionalComponent Video port If the monitor port is a 13w3 port To monitor port 13w3 cable commercially-availableUSB cable Accessory To USB port Playing Sound from the ComputerAudio cable Commercially-available To audio output port Example of PS/2 mouse connection Using the Remote Control to Operate the Mouse PointerTo PS/2 mouse port PS/2 mouse cable accessory To Mouse port Computer Mouse used Applicable cableExample of USB mouse connection To USB mouse portMoving the mouse Left click Right click Pointer Connecting to an External Monitor Monitor port Cable provided with monitorConnecting to a Video Source When connecting using the A/V cableProjecting Composite Video Images Projecting S-Video Images When connecting the audio output using an A/V cableTo audio output R port red Accessory To S-Video port To video outputProjecting Component Video Images To Computer 2/Component Video port To video output PortProjecting RGB Video Images To Computer 2/Component Video portTip Connecting to an External Speaker To external audioEquipment Turning Off the Projector Adjusting the Screen Image Adjusting the Image QualityTurning On the Projector Power inlet Lit orange Connecting the Power CordConnect the accessory power cord to the projector Turning On the ProjectorTurning On the Power and Projecting Images Operation indicator lights orangeProjector Macintosh After startup, changeTurning Off the Projector Pressmore. the Power button onceOperation indicator stops flashing and lights orange Check that the cool-down is completeRetract the front adjustable foot if it is extended Foot adjust buttonAttach the lens cover Turn the zoom ring on the projector to adjust the image Adjusting the Screen ImageAdjusting the Image Size Turn to Tele to reduce the sizeAdjusting the Image Angle Seen from the sideApprox above When tilted verticallyWhen tilted horizontally Approx to the right Approx to the leftCorrecting Keystone Distortion Correcting vertical keystone distortionCorrecting horizontal keystone distortion Tip Adjusting Computer Images Adjusting the Image QualityFocusing the Screen Image Automatic adjustmentAdjusting the tracking Adjusting the synchronization Either the remote control or Adjusting the VolumePress the Volume Button on Projectors control panelPage Using the Projector Menu Functions Functions for Enhancing ProjectionFunction Details Functions for Enhancing ProjectionList of Functions MuteBlack Blue Users logo Default setting Press the Freeze button on the remote control FreezeFor Hdtv Wide-screen ProjectionFor Sdtv Changing the display position for 169 displayPress the E-Zoom button on the remote control Remote control CrossZoom Tip Effect Remote control to select the typeEffects Select the type of pointer icon or barCanceling effects Picture in Picture P in P Size Approx /3.2 Approx /2.8 Approx /2.5 Approx /2.3 Main menu Sub-menu Using the Projector Menu FunctionsVideo menu Analog-RGB Digital-RGBMain menu Sub-menu Function Default Setting Computer Analog-RGB, Digital-RGBUsing the Projector Menu Functions Video RGB-Video, YCbCr, YPbPr, S-Video, Video RGB-Video Video,Video Component YCbCr, YPbPrUsing the Projector Menu Functions Audio menu Default Main menu Sub-menuFunction Setting Effect menuSetting menu Using the Projector Menu Functions Users Logo menu Advanced menu OFFAbout menu Computer Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPrComputer Reset All menu Video S-Video, VideoVideo Confirm the selection Using the MenusSelect a menu item Select a sub-menu itemUsing the Projector Menu Functions Select a setting value Select other menu items in the same wayClose the menu 101 Optional Accessories 100List of ESC/VP21 Commands 103 List of Supported Monitor Displays 106Troubleshooting Using the HelpTip Operation indicator Lamp indicator Temperature indicator When Having Some TroubleTroubleshooting Indicator status Projector Problem and remedyConditions in Safety Instructions/World Projecting No abnormality Progress Is a video signal being input? When the Indicators Provide No HelpIs sleep mode active? Try resetting all of the current settingsNot Supported is Does the input signal match the connected source?No images appear Messages do appear DisplayedAre the image signal format settings correct? Poor image qualityIs the projector at the correct distance? Is an extension cable being used? Has the correct resolution been selected?Are the cables connected correctly? Image is distorted Image contains interferenceOnly part of the image is displayed Large/small Images appear darkHave the color intensity and tint been adjusted correctly? Image colors are not rightNo sound can be heard Is sound being output from the audio source?Is sound being output to external speakers? Is the remote control too far from the projector? Remote control does not workPower does not turn off after the Power button is pressed Operation indicator remains orangeCleaning the Projector Case MaintenanceCleaning Cleaning the LensCleaning the Air Filter MaintenanceReplacing Consumables Lamp Replacement PeriodLamp indicator flashes orange or lights red Projected image gets darker or starts to deteriorateReplacing the Lamp Loosen the two lamp fixing screwsInstall the new lamp Install the lamp coverTake out the lamp Resetting the Lamp Operating Time Install the new air filter Replacing the Air FilterSaving a Users Logo Select Yes in the sub-menu, Then press the buttonTip Optional Accessories 100Glossary 101Glossary 102Command List of ESC/VP21 CommandsCommand List 103USB Connection Setup Communication protocolUSB connection Cable layoutsSerial connection 105List of Supported Monitor Displays 106Specifications Safety 108104 114 348 33.4 187 R3.8 M4x10 136 274 103.2 12.8 AppearanceUnits mm 109 33.7 46.8 97.2 16.7 116.5 90.8Index 110111 Index 112113 Page Declaration of Conformity FCC Compliance Statement For United States Users Page 402520600