Epson EMP-820, ELP-811 manual Only part of the image is displayed Large/small, Images appear dark

Only part of the image is displayed (Large/small)

Only part of the image is displayed

Small

•The [Resize] setting may not be selected correctly.

Press the [Resize] button. (P.41, 55)

•Has the Position setting been adjusted correctly?

Use the Position command in the Video menu to adjust. (P.63)

•Has the correct resolution been selected?

Set the computer so that the signals that are output are compatible with this projector. Refer to the documentation provided with your computer for details on changing the settings. (P.106)

•Change the resolution for the laptop computer or computer with a LCD screen.

Change the resolution so that the image is displayed in the whole of the projection area, or set the video signal to external output only. (P.38)

•Has the computer been set for dual display?

If dual display has been activated in the Display Properties of the computer's Control Panel, the projector will only project about half of the image on the computer screen. To display the whole of the image on the computer screen, turn off the dual display setting. Refer to the video driver manual for the computer's monitor for further details.

Images appear dark

• Is the lamp due for replacement?

If the lamp indicator is flashing orange, it means that the lamp will soon be due for replacement. When the lamp is nearly due for replacement, the image will become darker, and so the lamp should be replaced with a new one. (P.93)

•Has the image brightness been adjusted correctly?

Video - Brightness (P.63)

•Has the image contrast been adjusted correctly?

Video - Contrast (P.63)

87