Epson ELP-810UG, ELP-811, ELP-600 Connecting to a Video Source, Projecting Composite Video Images

Connecting to a Video Source

Caution :

When connecting the projector to other video sources, take the following precautions.

•Turn off the power for both the projector and the video source before connecting them. If the power for either device is on at the time of connection, damage may result.

•Check the shapes of the cable connectors and the device ports before making the connections. If you try to force a connector to fit a device port with a different shape or number of terminals, a malfunction or damage to the connector or port may result.

Projecting Composite Video Images

•Use the accessory A/V cable (red/white/yellow) to connect the video source to the Video and Audio 2 ports at the rear of the projector.

•If the audio output port of the video source is a stereo mini jack, use a commercially-available audio cable to connect the video source to the Audio 1 port at the rear of the projector.

When connecting using the A/V cable

To Video port (yellow)

To video output port (yellow)

To audio output L port (white)

To audio output R port (red)

A/V cable	To Audio 2 port
	(white/red)
(accessory)

When the video equipment's audio output port is a stereo mini jack

	To Video port
	(yellow)
To video output
port (yellow)	A/V cable (yellow)
	(accessory)
To audio output
port	To Audio 1 port

Audio cable (commercially-available)

Tip :

After making the connections, change the Audio Input setting in the Audio menu to

either Audio1, Audio2 or USB, depending on which input port you are using. The default setting is Audio2.

29