Replacing the Fuse
When you need to replace the fuse, use only a 250 V, 6.3A.T. fuse appropriate for your voltage. Follow these steps:
1.Turn off the projector and disconnect the power cord from both the back of the projector and the wall outlet.
2.Turn the projector so its back panel is facing you. The fuse holder is located below the power switch.
3.Remove the fuse holder by inserting a screwdriver or similar object into the groove. Then pry out the holder.
4.To remove the fuse from the holder, pull out one end so it is at an angle. Then pull out the fuse.
62 | 5 • Maintenance |