| When Auto is selected, the projector automatically |
| identifies the incoming video signal. If you select NTSC, |
| PAL, or SECAM, the projector accepts only the selected |
| video signal. Normally you should not change the default |
| setting. |
Tint | Adjusts the red/green color balance. Increase tint to |
(NTSC only) | make the image more green; decrease to make it more |
| red. |
Display menu
Horizontal | Moves the image left or right. To move the image to the |
| right, increase the setting; to move it to the left, decrease |
| the setting. |
Vertical | Moves the image up or down. To move the image up, |
| increase the setting; to move it down, decrease the setting. |
Menu | Switches the position of the menu between the top and |
| bottom of the projector screen. |
Menu Settings | 37 |