Epson ELP-3300 owner manual Connecting to a PowerBook

Connecting to a PowerBook

Your PowerBook must have a video-out capability. See page 6 for more information.

Before beginning, turn off the projector and computer if they are on. To access the connectors on the projector, push open the cover located on the right side of the projector, under the handle.

1.Attach the video-out cable supplied with your PowerBook to the video-out connector on the back of the PowerBook.

2.Attach the Macintosh VGA adapter to the VGA connector of the Y-cable.

3.Connect the VGA Macintosh adapter to the video-out cable.

4.Connect the Y-cable’s LCD connector to the projector’s Computer IN/OUT port.

5.Tighten the screws for all connectors to make sure they are fastened securely.

6.In the PowerBook’s Display Control Panel, select Mirroring.

Computer	L	R
Computer In/Out	Audio In

VGA connector

1

24

3LCD connector

monitor connector

S-Video

10 1 • Installation