Connecting to a Video Source
Tip :
•Change the "Input Signal" setting in the "Video" menu to "YCbCr " or "YPbPr " after making the connections. (p.49)
•If more than one external component is connected to the projector, use the [Source] button on the projector's control panel or the [Computer] button on the remote control to set the input source to "YCbCr " or "YPbPr ", depending on the type of signal being input. (p.30)
Projecting RGB Video Images
RGB video is used when RGB signals that have copy protection added are input and projected. Use the accessory computer cable to connect the video source to the Computer/Component Video port on the left side of the projector.
To RGB output port
To Computer/
Component Video port (blue)
Computer cable
(accessory)
Tip :
•Change the "Input Signal" setting in the "Video" menu to "RGB" after making the connections. (p.47)
•For a RGB connection, a commercially available adapter or converter cable might be required.
23