List of ESC/VP21 Commands
Command List
When a power ON command is sent to the projector, the power for the projector turns on. When the projector is in a command ready state, it returns the "3Ah"
(:)code. Furthermore, when command processing is complete, the projector also returns a ":" code.
The ":" code status can be used to determine whether the projector is ready or busy. If command processing terminates with an error, an error message is output and then the ":" code is sent.
| Item | Command | |
|
|
| |
Power ON/OFF | ON | PWR ON | |
|
| ||
OFF | PWR OFF | ||
| |||
|
|
| |
| Computer/Component | SOURCE 11 | |
| Video (RGB) |
| |
|
|
| |
| Computer/Component | SOURCE 14 | |
Signal selection | Video (YCbCr) |
| |
|
| ||
Computer/Component | SOURCE 15 | ||
| |||
| Video (YPbPr) |
| |
|
|
| |
| Video | SOURCE 41 | |
|
|
| |
| SOURCE 42 | ||
|
|
| |
A/V Mute ON/OFF | ON | MUTE ON | |
|
| ||
OFF | MUTE OFF | ||
| |||
|
|
| |
A/V Mute Selection | Black | MSEL 00 | |
|
| ||
Blue | MSEL 01 | ||
| |||
|
|
|
Communication Protocol
• Standard baud rate | : 9600 bps |
• Data length | : 8 bits |
• Parity | : None |
• Stop bit | : 1 bit |
• Flow control | : None |
• Connector shape | : |
• Projector input port | : Control |
84