Epson 52 manual Replacing the Air Filter

Maintenance

Replacing the Air Filter

Procedure

1 Turn off the projector power, wait for the cool-down period to end, and then disconnect the power cable.

The cool-down period lasts for about 20 seconds. The actual time will vary depending on the external air temperature.

2 Put your finger into the recess, and pull straight out to remove the air filter.

3 Install the new air filter.

Slide the cover in from the outside, and then push it in until it clicks into place.

Tip :

Dispose of used air filters properly in accordance with your local regulations.

79