When Having Some Trouble
|
| If the lamp is broken replace by a new lamp, |
|
|
| or contact your local dealer for further advise. |
|
|
| If replacing the lamp yourself, be careful to | p.76 |
|
| avoid pieces of broken glass. | |
|
|
| |
|
| (Projection cannot be carried out until the |
|
|
| lamp is replaced.) |
|
|
|
|
|
|
| Check that the lamp and the lamp cover are |
|
|
| securely installed. If the lamp or lamp cover is | p.76 |
|
| not securely installed, the lamp will not switch | |
|
|
| |
|
| on. |
|
|
|
|
|
Red | Internal | Stop using the projector, disconnect the power |
|
problem | cable from the electrical outlet, and contact |
| |
|
| ||
| your dealer or the nearest address provided at |
| |
| "International Warranty Conditions" in Safety |
| |
intervals) |
|
| |
|
| ||
|
|
|
|
Orange | (This is not an abnormality, but if the |
| |
cooling in | temperature rises too high again, projection |
| |
|
| ||
| progress | will stop automatically.) |
|
|
| • Set the projector up in a place which is well- | p.16 |
|
| ventilated, and so that the air filter and |
|
|
| exhaust vents are clear. |
|
|
| • Clean the air filter. | p.73 |
|
|
|
|
Tip :
•If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" on the following page.
•If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided at "International Warranty Conditions" in Safety
63