Kodak EKTAPRO instruction manual Projector-Features, Electrical Approvals and Conformity Mark

Page 3

Projector-Features

1Fan (air inlet)

2Focusing buttons

3Slide change buttons (forwards; backwards)

4 Remote Socket

5 Tray positioning index mark

6Lamp module

7 Air exhaust

8 Lamp module release

9 AC mains socket

10 Mains switch (electrical)

11 Fuse link compartment (primary circuit)

12 Voltage indicator

13 Fuse link

14 Fuse (primary circuit)

15 Focusing knob for gear rack lenses

16 Lever for slide tray positioning

17 Slide gate

18 Slide tray lock

19 Slide tray transport ring

20 Height adjustment foot

21 Retractable handle

Electrical Approvals and Conformity Mark

ElectricalApprovals

The KODAK EKTAPRO 320 Slide Projector complies with Inter- national Safety requirements and bears the following safety marks:

UL (Underwriter Laboratories Inc.)

CSA (Canadian Standards Association)

VDE (Verband Deutscher Elektrotechniker)

CEConformityMark

ToshowcompliancewithEMV-Directive89/336/EECandproduct safety requirements, the slide projector bears the CE mark.

Please note

In case of extreme mains disturbances problems with lamp flashing and/or jamming may occur. In this case please switch the projector off and on again! In case of a jam, please refer also to „Possible problems during operation as written in the manual on page 22. (Please keep the tray position in mind before switching on the projector. With the random access function of the IR remote control or the rapid search via the reverse transport button you will easily come back to this position.)

In case of an electrostatic discharge, the projector will execute a reset and the tray will be moved to the zero position.

Radiointerference:

EECdirective89/336

Australia standards AS 1044

RFS49ISSUESJuly1989

VCCI Regulations Nov. 1987 Class 2

Part 15 of FCC Rules Subpart J Class B

Using the instruction manual

Open the cover flap. Here you will find illustrations of the projector. The figures have also been incorporated into the operating in- structions to enable quick and exact identification of the individual projector features.

Action arrow:

Reference arrow:

Important texts are highlighted in grey.

WARNINGS are framed.

14

Image 3
Contents Kodak Ektapro Page Electrical Approvals and Conformity Mark Projector-FeaturesEnglish Important Safety PrecautionsSwitching- on the projector Switching-on the projectorCheck voltage setting Setting of a different operation voltageTray positioning index mark Loading and installing the slide trayTo reduce slide temperature and light output Extra Bright LampFastening or mounting the projector Setting up the projectorFitting the lens Leveling the projectorRemoving the slide tray in any position OperationSlide changing Changing the slide tray in zero positionService Replacement of fusesSimultaneous Projection Replacement of a defective lamp GuaranteeCleaning the projector Possible problems during operation AccessoriesTechnical Data Kodak /HQVHV ’$..7$352Page Germany