Switching-on the projector
Check voltage setting
EKTAPRO Slide Projectors will be exported throughout the world to countries with differing mains voltages. The projectors are already set during manufacture to a fixed mains voltage.
Shipments to countries with 220, 230 or 240 V mains will be equipped with a T 2A L/ 250 V fuse. A spare fuse for replacement is also supplied.
Before you switch on your projector ensure that the voltage is correctly adjusted! An incorrectly adjusted mains voltage can damage the projector! The voltage indicator (12) must show your country´s actual mains voltage!
2.
1.
3.
Setting of a different operation voltage
WARNING
For safety, the mains lead must be unplugged!
1. Unlock the fuse link compartment (11) by using a screwdriver and pull compartment out.
2. Push the fuse link (13) into the compartment so -
3. - that the applied voltage can be seen in the window (12) of the compartment.
.Push the loaded compartment (with mounting underneath) firmly into the projector opening provided.
Switching- on the projector
.Connect your EKTAPRO Slide Projector to the mains with the mains lead .
(UK users note: A suitable fused 13A plug
.must be fitted. See instructions on cable!) Turn on the mains switch (10).
The projector is switched on and ready for use. Lamp and fan are switched on.
16