Installing a New Lamp
14.After installing the bulb, it will be necessary to adjust the bulb position in order to render even illumination across the screen. Position the projector so the light from the lens is directed onto a reasonably good screen.
Facing the projector from the rear, three (3) adjustment holes are located on the lamp house cover’s left side. Remove the black rubber plugs to expose the three (3) adjustment holes. The larger Phillips screwdriver may inserted through each hole to adjust the lamp position.
The left adjustment (A) will move the image of the light along a diagonal from top left to bottom right and back. The center adjust- ment (B) will move the image up or down. The right adjustment (C) will move the image along a diagonal from bottom left to top right. Try to adjust the image of the light on the screen for the most even illumination across the screen.
Lamp House Cover
(side view)
11