Operating the Unit & Remote Control
Cleaning the Mirrors & Optical System
13.When turning the projector off, rotate the operating switch counter clockwise one step. The lamp will go off, but the fan will continue to operate. Allow the fan to operate for a few minutes to properly cool the bulb, then shut off the fan by turning the operating switch to the OFF position. Turn the power switch to the OFF position.
For added safety, your projector has a
The flat mirror in the 560 Series is aluminum coated and works as a surface reflecting mirror. In the 750 Series, there is a heat absorbing flat mirror.
Take care not to leave finger prints, stains or scratches on the surface of the elliptical mirror, the flat mirror or the Xenon bulb.
If the mirrors are smudged or stained, wipe them off gently with a lens cleaner or a piece of gauze wetted with a mixture of alcohol and ether.
Insulation Plate
Housing
Magnet Assembly
Elliptical Mirror
Xenon Bulb
Flat Mirror
Remote Control
Connect the standard Kodak
This connector is used with standard Kodak
1.Focus In
2. | Slide Forward | 4 | 1 |
|
|
| |
3. | Slide Reverse |
| 5 |
4. | Focus Out |
| 2 |
| 3 | ||
5. | COM |
|
|
14