Installing a New Lamp
Warning Δ
Read these instructions carefully before you remove the projector and other components from the container.
Xenon Lamp
Ellipsoid Mirror
Lamp Adjusting Screws (3)
Condenser Lens
Plane Mirror
Lamp Positive
Wire Screw
Getting Started
1.Remove contents from shipping container and check against the following list:
n Projector n Power Cord
n Xenon Bulb (DO NOT REMOVE THE BULB FROM THE BOX UNTIL DIRECTED TO DO SO)
n Tools – large and small Phillips screwdrivers
2.Place the projector on a flat, stable surface and adjust leveling feet by turning. This revents the projector from rocking. Make sure the projector is turned off and unplugged from the wall socket.
3.Remove the four (4) white thumbscrews attaching the lamp house top cover. (Do not remove the small covering plate on the lamp house cover if it is installed.)
8