Kodak 750, 560 manual Important Before Opening the BOX Containing

Page 2

Warning

Warning Δ

IMPORTANT: BEFORE OPENING THE BOX CONTAINING THE

XENON BULB, NOTE THE FOLLOWING PRECAUTIONS: The

Xenon bulb contains gas under pressure. Care should be taken in

handling the bulb to avoid injury.

Wear protective clothing such as gloves, long-sleeved shirt, face and eye covering to protect against flying glass in the event of bulb breakage.

Handle the bulb only by the ends. Natural skin oils from hands may damage the quartz envelope.

Always allow the bulb to cool before handling.

When necessary, clean the bulb with ordinary rubbing alcohol (only when the bulb is cool).

Place the bulb on a soft, secure surface away from table edges.

Never operate the bulb with the lamp cover off. Do not permit light from the bulb to fall directly on skin or clothing. The Light from the Xenon bulb is rich in ultraviolet rays similar to direct sun rays. This could burn the skin and bleach clothing. Do not look at the bulb directly while it is on. The light emerging from the projector lens is safe as long as common sense is exercised.

If you have any questions regarding the installation of the Xenon lamp, please call Navitar at 1-800-828-6778.

Image 2
Contents Navitar Xenon 560/750 High Intensity Slide Projector World Leader in Image QualityImportant Before Opening the BOX Containing Table of Contents Page Introduction Supplied Components Servicing & RepairSide View 560/750 System DiagramsTop View Front View Rear ViewFeatures Features Installing a New Lamp Getting StartedImportant Before Opening the BOX Containing Installing a New Lamp Installing a New Lamp Arc Correcting Magnet 750W Operating the Unit & Remote Control Power Supply ProjectionCleaning the Mirrors & Optical System Remote ControlEmitter Adjusting the Lamp Position Lamp AdjustmentAdjusting the Lamp Position Slide Burning & Picture Flicker Explanation & RemedyMagnet Adjustment Solution Slide Moisture Problems Areas of High Humidity Simple SolutionsAttaching a New Dissolve Module Connecting the Dissolve Interface to the Dissolve ModuleUnits with Dissolve Module & Dissolve Interface Dissolve Shutter Manual Knob Units with Dissolve Module & Dissolve Interface Safety Precautions Lamp Location of Components SeriesLocation of Components Troubleshooting Symptom CAUSE/REMEDYSchematic Diagrams 560AF/DM750AF/DM 560 & 750 RAK/RARS232 Specifications Optical System Power Supply Slide ProjectorSpecifications Lamp Specifications General Components Specifications Features Navitar Dissolve Interface MDC200INL Type Imput Connector Fuse AC In Connector Operation Safety Precautions Examples of Connections Warranty Year Parts Year Labor
Related manuals
Manual 32 pages 9.6 Kb