Warning Δ
Safety Precautions
Projector must be on a flat, stable surface.
The Xenon lamp is under pressure. Protect yourself from the unlikely, but possible explosion of the lamp by wearing protective glasses and clothing.
Do not open the lamp house cover during operation. Do not look at the burning lamp directly. During lamp position adjustment, employ a pair of good ultraviolet prevention eye glasses.
Do not apply stress or shock to the lamp even when the lamp is not burning. Take extra care when shipping the projector with the lamp inside.
Before removing the lamp house cover, be sure to unplug the projector.
Ground the projector electrically for safety.
Before changing the lamp, read the safety precautions and observe them.
Be careful not to connect the lamp to the wrong polarity. Supply low ripple current for lamp.
Avoid projection in an extreme downward inclination. This may cause your lamp to flicker.
Take care of cooling the lamp after usage.
Do not repeatedly perform the lamp on/off operation.
Do not disturb the air flow by placing any foreign matter in front of the vent holes of the projector.
For lamps other than the ozone- free type, use effective room ventilation.
Do not touch the lamp with naked fingers. When required, hold the bulb with a piece of gauze or fabric to keep the bulb free from finger prints. Hold lamp by the ends.
Operate the Xenon lamp under the rated maximum current.
24