Kodak 750, 560 manual Features

Features

Slide Projector

Models 560AF/DM and 750AF/DM use a Kodak Ektagraphic-IIIAMT modified for our Xenon light source.

Models 560RAK/RARS-232 and 750 RAK/RARS-232 use a Navitar ColorPro modified for our Xenon light source.

Slide Tray

80 slide trays are recommended.

Lamp House

Contains a Xenon lamp, a reflector and a mirror.

Slide Forward Button

Advances the slide tray.

Slide Reverse Button

Moves the tray backward.

Power Supply Unit

The power unit for lighting the Xenon lamp. It contains electronics and cooling fans.

Slide Select Lever

By pressing the lever, you can freely rotate the slide tray.

Focus Knob

Turn the knob to manually focus the lens.

Dissolve Module

(Standard on 560DM/750DM projectors.) Contains a shutter, cam and d.c. servo motor.

Dissolve Control Connector

Connects the cable from the Navitar Dissolve Interface unit to the 560DM/750DM projector.

Operating Switch

The on/off switch to control the fan and the Xenon lamp.

Pilot Lamp

This lamp will light when power is applied.

Power Switch

Power is controlled by this switch after the power cable is connected.

Remote Control Connector

Located on the power supply side, it connects the optional remote connector to operate the fan and lamp by a remote control system.

6