Faxing
Fax Setting
Fax Print
Fax Speed
Redial if No Answer
Busy Redial Attempts
Disable Call Waiting
Call Waiting Disable Code
Distinctive Ring
Fax Speaker
Print Fax Confirmation Page
Options
Fast - 33.6K (default) Medium - 14.4K Slow - 9.6K
Yes (default) / No
0 to 12 (default is 5)
No (default) / Yes
*70 (default)
Any ring (default) / Single Ring / Double Ring / Triple Ring
On (default) / Off
After Fail Only (default) /
Never / Always
Description
Prints the fax on one side of the paper.
Prints the fax on both sides of the paper.
Use this setting to reduce the fax transmission speed of your printer if you have difficulty with faxing at higher speeds.
If the fax number you call does not answer, the printer will redial the number automatically once.
The number of times that the fax will attempt to redial a busy number.
If you have a
Select Yes to disable call waiting, then enter the call waiting disable code (below).
The printer automatically dials the call waiting disable code before dialling the number to which you are sending a fax. This code disables call waiting for the duration of the fax, preventing incoming calls from interrupting your fax transmission.
The usual code to disable call waiting is the default *70. If the call waiting disable code is different in your area, press OK, then press 
to erase the current code. Use the keypad to enter the correct code, then press OK.
:You must enable call waiting manually after your fax transmission.
This service, available from most phone companies, adds multiple phone numbers to one phone line. Each phone number then has a distinctive ring pattern (single, double or triple ring) to let you know which number is ringing. Select the ring pattern assigned to the phone number for the printer so the printer can receive faxes automatically.
The fax speaker allows you to hear the dial tone and initial fax tones when sending faxes.
The Fax Confirmation Page contains the time and date, the number you called, the number you called from and whether the transmission was successful.
60 | www.kodak.com/go/aiosupport |