Scanning
Scan Option
Scan To
Scan What
Settings
Name of computer (only if a computer is connected by wireless or Ethernet network)
Document (default)
Photo
Description
The scanned file is sent to the USB- connected computer.
The scanned file is sent to the computer on the wireless or Ethernet network.
Sets the scan settings for scanning a document (see Changing the scan settings for scanning from the printer control panel, 49).
Sets the scan settings for scanning a picture (see Changing the scan settings for scanning from the printer control panel, 49).
Scan Destination |
| File (default) |
|
|
|
|
|
|
|
| Application (available only when Home |
|
| Centre Software is installed on |
|
| computer) |
|
|
|
Save as Defaults |
| No / Yes |
|
|
|
|
|
|
Sends the scanned file in the format and to the location on your computer that you designate.
Sends the scanned file to Home Centre Software.
To save the settings as the new default, press OK. With Yes selected, press OK.
5.Press . The scanned file appears at the destination you specified.
6.Follow the
Scanning to a memory card
1.Insert the memory card into the memory card slot on the printer.
2.Press .
3.Press to select Scan, then press OK.
4.Press to select Scan to Memory Card, then press OK.
5.Press to select an option, then press or to change the setting.
Scan Option
Scan What
File Type
Settings
Photo (default)
Document
JPG (default)
Description
Sets the scan settings for scanning a picture (see Changing the scan settings for scanning from the printer control panel, 49).
Sets the scan settings for scanning a document (see Changing the scan settings for scanning from the printer control panel, 49).
The scanned file is saved as a JPG.
The scanned file is saved as a single- page PDF.
The scanned file is saved as a multiple- page PDF.
52 | www.kodak.com/go/aiosupport |