7.To remove a sheet just entering the fuser:
a.Separate the trailing edge of the sheet from the belt.
b.Move the paper release lever for the fuser toward the front, and remove the sheet.
c.Release the lever.
8.If the sheet is well advanced into the fuser:
a.Move both fuser release levers toward the front of the printer to release the fuser. Hold the fuser by the handle and lift it out of the printer.
b.Place the fuser on a flat surface.
c.Move the paper release lever and pull the jammed paper from the fuser.
d.Replace the fuser unit and move the fuser release levers toward the rear of the printer. See “Replacing the Fuser” on page 15.
19