Kodak DL2100 manual Ipconfig /renew

Page 25

	Problem/Message	Possible Solution


	You are having	1.	From the Kiosk, touch:
	connectivity issues and	•		[Setup]
	your site uses DHCP.	•		[Setup]
	your site uses DHCP.	•		[Configure System Settings]
		•		[Configure System Settings]
		•		[Configure Network]
		2.	Use the arrows to select:
			ipconfig /renew.
		3.	Touch [Execute].
		4. Check the Network Settings with your
			system administrator.
		5.	If the problem persists, contact KODAK
			Service and Support.

	“Disconnected”	1.	Check that the network cable is
	appears on the		connected at both ends.
	Network Configuration	2.	Check that the network device that the
	screen.	2.	Check that the network device that the
	screen.		Kiosk is connected to is powered on.
			Kiosk is connected to is powered on.
		3.	Check the Network Settings with your
			system administrator.
		4. If the problem persists, contact KODAK
			Service and Support.

24

Image 25

Contents User’s Guide For Kodak DL2100 Duplex Printer Contents To avoid injury or damage, follow these instructions Safety InformationOperating condition range for this product is 50 to 90 F Front View OverviewRear View Printing the Configuration Report Using the Printer MenuLoading Paper and Greeting Card Paper Loading MediaChanging Toner Cartridges Lift the toner release lever Page Supplies MaintenanceReplacing the Image Drum Replacing the Transfer Belt Page Replacing the Fuser Cleaning the LED Head Clearing Paper Jams Paper Jam Error Message SummaryPage Page Printer Front Remove the second paper tray and any jammed paper Resolving Printer Error Messages TroubleshootingResolving Error Messages on the Kiosk Ipconfig /renew If the problem persists, contact Kodak Service and Support From the Main screen of the APEX, touch Apex Problem/Message Possible Solution Correcting Print Skewing Cleaning the Front Pick RollersCleaning the Duplex Rollers Specification SpecificationsSpecification Eastman Kodak Company State Street Rochester, NY