Kodak DL2100 manual Cleaning the Duplex Rollers

Page 31

Cleaning the Duplex Rollers

Important!

Make sure that you wear lint-free gloves to perform this procedure.

1.Turn off the printer.

2.Unplug the power cord.

3.Open the cover for the duplex unit.

4.Dampen a lint-free cloth with warm water.

5.Turn one roller while you use the damp cloth to wipe the other roller. Use the damp cloth to wipe the entire surface of the roller. Repeat the procedure for the second roller.

6.Use the damp cloth to clean the lower set of rollers. Wipe in one direction only, rotating the roller to clean the entire surface.

7.Wait approximately 5 minutes for the rollers to dry.

8.Close the cover for the duplex unit.

9.Plug the power cord for the printer into the power source.

10.Turn on the printer.

30

Image 31
Contents User’s Guide For Kodak DL2100 Duplex Printer Contents To avoid injury or damage, follow these instructions Safety InformationOperating condition range for this product is 50 to 90 F Front View OverviewRear View Printing the Configuration Report Using the Printer MenuLoading Paper and Greeting Card Paper Loading MediaChanging Toner Cartridges Lift the toner release lever Page Supplies MaintenanceReplacing the Image Drum Replacing the Transfer Belt Page Replacing the Fuser Cleaning the LED Head Clearing Paper Jams Paper Jam Error Message SummaryPage Page Printer Front Remove the second paper tray and any jammed paper Resolving Printer Error Messages TroubleshootingResolving Error Messages on the Kiosk Ipconfig /renew If the problem persists, contact Kodak Service and Support From the Main screen of the APEX, touch Apex Problem/Message Possible Solution Correcting Print Skewing Cleaning the Front Pick RollersCleaning the Duplex Rollers Specification SpecificationsSpecification Eastman Kodak Company State Street Rochester, NY