Safety Information
To avoid injury or damage, follow these instructions.
Ensure this and all other documentation is read carefully and retained for future reference.
Ensure all warning and instruction labels on the product are read, understood, and followed to prevent any risk of injury.
Check the weight of the product and take all necessary precautions to prevent any risk of injury.
Place the product on a flat, solid surface strong enough to support its weight to prevent any risk of injury.
Ensure that there is adequate ventilation all around the product to prevent overheating and any risk of fire.
Keep the product away from direct heat sources such as radiators and out of direct sunlight to prevent overheating.
The power supply required for this product is
Ensure both the product and main power switches are in the OFF position before connecting the AC power cable.
Do not connect or disconnect the power plug with a wet hand. Doing so may cause electric shock.
Always hold the power plug to connect/disconnect the power cable to/from the main wall outlet. Unplugging by pulling on the cable can cause fraying and may lead to fire or electric shock.
This product has an earthed plug as a safety feature and will only connect to an earthed socket. Do not attempt to defeat the earthing. Otherwise, fire or shock may occur.
If using an extension cable or power strip, ensure that the total current rating (amperes) of all connected equipment is less than the maximum rating of the extension cable, power strip, or wall outlet. If the product is already supplied with a fitted power strip, then no additional power strip or extension cable should be used to connect to the main wall outlet. Otherwise, fire or shock may occur.
Ensure the power cable is routed so as not to be damaged or cause a trip hazard. If the cable becomes frayed or damaged, replace it immediately to prevent any risk of shock.
Do not twist, constrict, or knot the power cable. Doing so can cause overheating, which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not intended for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable supplied with this product for any other electrical equipment.
Ensure that you connect the power cord or any other cables only as directed in this User's Guide, otherwise fire may occur.
Turn off the product prior to opening covers; otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit. Allow it to cool before touching.
2