Kodak DL2100 manual Correcting Print Skewing, Cleaning the Front Pick Rollers

Correcting Print Skewing

Where does the skewing occur on the print?

Top of print	Bottom of print
See “Cleaning the Front Pick	See “Cleaning the Duplex Rollers”
Rollers” below.	below.

Cleaning the Front Pick Rollers

Important!

Make sure that you wear lint-free gloves to perform this procedure.

1.Turn off the printer.

2.Unplug the power cord.

3.Pull out the paper trays.

4.Dampen a lint-free cloth with warm water. Clean the rollers in both paper trays. Wipe in one direction only, rotating the roller to clean the entire surface.

5.Remove the paper trays from the printer.

6.Repeat the cleaning procedure on the rollers inside of the bays for the paper trays.

7.Wait approximately 5 minutes for the rollers to dry.

8.Plug the power cord for the printer into the power source.

9.Turn on the printer.

29