Administrator Information
5Enter the new management code using the numeric keys.
Management code change
Change the management code.
Use the numeric keys to set 8 digit numbers.
27451172
BackClose
Clear
System Menu | - Machine Default |
6Press the Close key.
Step 3: Hard Disk Overwrite Setting
Selects the hard disk overwrite. See page
Note Note that it does not apply to overwrite and formatting individually.
1Press the Default Setting/Counter key.
2Press the Machine Default key.
3Use the numeric keys to enter the current Management code. The factory default numbers are 80008000 for 80 cpm model and 60006000 for 60 cpm model.
4Select Hard Disk Overwrite from the left side setting field, and press the
Change # key.
5Press 3-time Overwrite or Once Overwrite.
Hard Disk Overwrite | Back | Close |
Select the hard disk overwrite. |
|
|
Once Overwrite
System Menu | - Machine Default |
6Press the Close key.