Kyocera FS-1010 service manual Normal messages, Remote Operation Panel display

Normal messages

Indicator	Remote Operation Panel display	Description
	Cancelling data	Data inside the printer is being
		canceled.
		The indicators light in sequence from
		the top, then go off in sequence from
		the bottom. This process is repeated
		twice.
		When the printer is switched on for
		the first time after the toner container
		is installed, (Adding toner) also
		appears.
	Please wait	The printer is warming up and is not
		ready to print. The indicators light in
		sequence twice from top to bottom.
		When the printer is switched on for
		the first time after the toner container
		is installed, (Adding toner) also
		appears.
	Processing	The printer is receiving data.
	Processing	The printer is processing data.
	Waiting	The printer is waiting for the end-of-
		job command before printing the last
		page. Pressing the Cancel key allows
		you to obtain the last page
		immediately.
	Form Feed Timeout	The printer is printing the last page
		after a waiting period.
	Ready	The printer is ready to print.
		The printer is offline. The printer
		stores but does not print received data.
	Sleeping	The printer is in sleep mode. The
		indicator flashes at 5-second intervals
		and all other indicators go off. The
		printer wakes from Sleep mode
		whenever a key on the operator panel
		is pressed, the cover is opened or
		closed, or data is received. The printer
		then warms up and goes online. (You
		can set the amount of time before the
		printer enters sleep mode from the
		Remote Operation Panel utility.)
		FS-1010

6-5