Low profile stand setup
Installing the scanner
CAUTION: The scanner requires two people to lift it safely.
1Place the scanner base on the scanner shelf.
2Insert the one thumbscrews attached to the bottom of the scanner shelf into the bottom of the scanner, and tighten it securely.
3Align the hinges on the scanner top with the slots in the scanner, and then lower the scanner top onto the scanner.
For information on removing the scanner top, see “Removing the scanner top” in the User’s Guide located on the Software and Documentation CD.
4Connect the two scanner cables.
Note: To prevent errors and scanner malfunction, make sure the scanner cable thumbscrews are tightened securely.
5Go to Removing the print cartridge packaging on page 32.
Go to page 32
Installing the scanner
23