Scanner setup
5Turn on the printer.
Fax setup
When you first turn on the MFP or if the MFP has been off for an extended time, Set clock will appear. Additionally, many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page or on the first page of the transmission:
•Date and time (date and time fax is sent)
•Station name (identification of the business, other entity, or individual sending the message)
•Station number (telephone number of the sending fax machine, business, other entity, or individual)
Note: See Electronic emission notices and Other telecommunications notices for FCC information in the User’s Guide on the MFP Software and Documentation CD.
There are two methods to enter your fax setup information:
•Manually enter the information through the MFP control panel; see “Performing manual fax setup” on page 45.
•Use your browser to access the MFP IP address and then enter the Configure menu; see “Performing browser fax setup” on page 47. For information on assigning an IP address, see Assigning a printer IP address on page 46 and Verifying the IP settings on page 47.
Note: If you do not have a TCP/IP environment, you must use the MFP control panel to set your basic fax information.
Use the following table to locate the method you want for fax setup.
Topic | Go to page... |
Performing manual fax setup | 45 |
|
|
Performing browser fax setup | 47 |
|
|
Performing manual fax setup
1Touch the menu button on the home screen.
2Touch Settings.
3Touch Fax Settings.
4Touch General Fax Settings.
5Touch Station Name.
6Enter the Station Name (enter your name or company name).
Fax setup
45