Lexmark T64X setup guide Installing a firmware card

Page 40

Installing printer memory or option cards

Installing a firmware card

Note: Firmware cards designed for other Lexmark printers may not work with the printer.

1Remove the system board access cover. (See Accessing the printer system board.)

Note: If a firmware card has been installed, you must remove it. Only one firmware card is allowed.

2Unpack the firmware card.

3Holding the firmware card by the locking clips, align the plastic pins on the card with the holes on the system board.

4Push the firmware card firmly into place, and release the locking clips.

The entire length of the connector on the firmware card must touch the system board and be locked into the connector.

Be careful not to damage the connectors.

Firmware card

Connector

Installing a firmware card

39

Image 40

Contents MFP Option Stability Information Stability InformationStability Information 2000 !#$% Stability Information English United States Government Rights Contents Contents Conventions Using this book Getting startedTurning off the printer Selecting a location for your printer and MFPCustomizing your MFP option Input options Output options Other optionsWhere to begin Drivers and optionsMFP Adjustable stand setup Assembling the MFP adjustable standInstalling a 250- or 500-sheet drawer Installing a duplex unit Setup Sheet Publications CD Positioning the printerInstalling the finisher or mailbox Installing the scanner Low profile stand setup Assembling the low profile standLow profile stand setup Installing a duplex unit Positioning the printer Installing the scanner shelf Installing the scanner Caster base setup Installing the caster base Installing the scanner Go to Scanner stand setup Positioning the scanner standInstalling output options Scanner option setup Positioning the scannerScanner option setup Setting up the printer Removing the print cartridge packagingOrdering print cartridges For Latin America Loading paper Installing printer memory or option cards Accessing the printer system boardInstalling printer memory or option cards Installing a memory card Installing a firmware card Installing an interface card and cable Replacing the shield Scanner setup Installing the printer operator panel coverAttaching cables and power cords Unlocking the scannerInstalling drivers Fax setup Performing manual fax setupAssigning a printer IP address Verifying the IP settings Verify MFP setup Printing a menu settingsTesting a scan to PC profile Distributing MFP user information Finding user instructionsDistributing user information Limiting MFP useSolve setup problems Getting more help

Related manuals

Manual 5 pages 674 b

Manual 2 pages 24.51 Kb