Caster base setup
3Align and insert the scanner shelf mounting brackets into the slots on top of the printer.
4Make sure the scanner shelf is positioned securely.
5Place the tips of the wire bail into the ends of the plastic brackets so that the bail curves downward. The wire bail came with the printer and rests in the standard output bin when installed.
6Attach the plastic bracket to the scanner shelf.
Installing the scanner
CAUTION: The scanner requires two people to lift it safely.
1Place the scanner base on the scanner shelf.
2Insert the two thumbscrews attached to the bottom of the scanner shelf into the bottom of the scanner, and tighten it securely.
Installing the scanner
26