Lexmark E352DN manual Configuration menu see Turning on Reduced Curl mode

Page 52

Troubleshooting

Symptom

Cause

Solution

Incorrect characters

You are using an

If you are using a parallel interface, make sure you are using an

print.

incompatible parallel

IEEE 1284-compliant parallel cable. We recommend Lexmark part

 

cable.

number 1021231 for the standard parallel port.

 

 

 

 

The printer is in Hex

If Ready Hex appears on the display, you must exit Hex Trace

 

Trace mode.

mode before you can print your job. Turn the printer off and back on

 

 

to exit Hex Trace mode.

 

 

 

Large jobs do not

Collate is not set to

Set Collation to On in the Finishing Menu or through the printer

collate.

On.

driver.

 

 

Note: Setting Collation to Off in the driver overrides the setting in

 

 

the Finishing Menu.

 

 

For more information, see the Menus and Messages Guide.

 

 

 

 

The job is too

Reduce the complexity of the print job by eliminating the number

 

complex.

and size of fonts, the number and complexity of images, and the

 

 

number of pages in the job.

 

 

 

 

The printer does not

Add printer memory.

 

have enough

 

 

memory.

 

 

 

 

Unexpected page

The job has timed

Set Print Timeout to a higher value from the Setup Menu.

breaks occur.

out.

For more information, see the Menus and Messages Guide.

 

 

 

 

 

The paper is curled

The print media has

• Use paper that is sealed in its original packaging.

once it exits the printer.

been in the printer too

• Turn the paper over.

 

long or is too heavy.

• Rotate the paper 180 degrees.

 

The print job has too

• If you are printing a multiple-page job, try duplexing it.

 

many pages for

• When printing on heavy print media, open the rear exit door for a

 

simplex printing.

straight-through path.

 

The paper has

• Try another kind or brand of print media, such as a xerographic

 

paper for laser printers.

 

absorbed moisture

 

due to high humidity.

• If possible, try printing in a less humid environment.

 

 

If the paper still curls, select the Reduced Curl setting from the

 

 

Configuration menu (see Turning on Reduced Curl mode).

 

 

 

Turning on Reduced Curl mode

If the print media is curled once it exits the printer, Reduced Curl mode can be turned on to help reduce the problem. However, before turning this mode on, you should try the possible solutions offered in Troubleshooting. For more information, see The paper is curled once it exits the printer.

Note: Print speed is significantly slower in Reduced Curl mode.

1Turn the printer off.

Note: Disabling the control panel menus does not prevent access to other menu groups.

2Press and hold and while turning the printer on.

3Release both buttons when Performing Self Test appears on the display.

The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.

4Press until Reduced Curl appears, and then press .

Off* is default.

5Press once, On appears.

Turning on Reduced Curl mode

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents E352dn Edition June Contents Contents Learning about the printer Printer overviewLearning about the printer Paper Menu PostScript MenuPpds Menu Finishing MenuUnderstanding the control panel BackButton or control panel Function Status IndicatesUnderstanding print media guidelines Source Sizes Types Weight Capacity* sheetsWhat types of print media can be loaded? Paper characteristics Selecting print mediaPaper Understanding print media guidelinesUnacceptable paper SmoothnessUnderstanding print media guidelines Selecting paper Selecting preprinted forms and letterheadTransparencies Understanding print media guidelines Printing on letterheadSelecting transparencies Media source or process Print side TopEnvelopes LabelsStoring print media Card stockAvoiding jams Printing Loading the 250-sheet trayPrinting Printing Extending the tray for legal-size or folio-size paper Printing Attaching the dust cover Loading the manual feeder Linking trays Sending a job to printCanceling a print job Canceling a job from the printer control panelCanceling a job from a computer running Windows Canceling a job from the taskbarCanceling a job from a Macintosh computer Printing the menu settingsCanceling a job from a Macintosh computer running Mac OS Printing a network setup Printing a font sample listInstalling options Accessing the system boardInstalling options Installing options Access the system board see Accessing the system board on Adding a memory cardAdding a flash memory card Board onInstalling an optional 550-sheet drawer Click Start Æ Settings Æ Printers Recognizing installed optionsClick File Æ Properties Click the Install Options tab Supply Menu selection item What the setting does Maintaining the printerStoring supplies Conserving suppliesMaintaining the printer Part number Description Average cartridge yieldOrdering a toner cartridge Changing a toner cartridgeMaintaining the printer Photoconductor kit end-of-life Ordering a photoconductor kitChanging a photoconductor kit Maintaining the printer Recycling Lexmark products Maintenance kitMachine voltage Part numbers Clearing jams Identifying jamsUnderstanding jam messages Message What to doClearing a jam Clearing jamsClearing jams Clearing jams Clearing jams Clearing a jam in the manual feeder Clearing jams Online customer support Calling for service TroubleshootingChecking an unresponsive printer Solving printing problems TroubleshootingSymptom Cause Solution Set Page Protect to Off from the Setup MenuTurning on Reduced Curl mode Configuration menu see Turning on Reduced Curl modeSolving option problems Option ActionSolving service message issues Solving paper feed problemsProblem Solution Occurring, see Avoiding jams onSolving print quality problems Problem ActionUnderstanding print media guidelines on Http//support.lexmark.com210C 410F Troubleshooting Menu selection Purpose Values Driver option Purpose Values†Cleaning the printhead lens Close the front door Turn the printer on Disabling control panel menus Administrative supportEnabling control panel menus Restoring factory default settings Selecting printer operating modeSetting security using the Embedded Web Server EWS Administrative supportUsing the secure Embedded Web Server Setting the system passwordClick Configuration Click Menu Lockout Setup Locking the control panel menusConventions Electronic emission notices Industry Canada compliance statementEuropean Community EC directives conformity Noise emission levels Product energy consumptionStatement of Limited Warranty for Lexmark E352dn Laser noticeLimited warranty service Additional rights Index NumericsIndex
Related manuals
Manual 4 pages 59.49 Kb

E352DN specifications

The Lexmark E352DN is a monochrome laser printer designed for small to medium-sized businesses seeking efficiency and performance without breaking the bank. Known for its reliability and quality, this printer delivers professional-grade prints with impressive speeds and excellent output quality.

One of the standout features of the E352DN is its fast print speed, which can reach up to 33 pages per minute (ppm). This efficiency is essential for busy work environments where time is of the essence. Additionally, the first page out time is quick, typically around 6.5 seconds, enabling users to get their documents printed promptly.

The E352DN boasts a resolution of up to 1200 x 1200 dots per inch (dpi), ensuring sharp text and crisp graphics. This high-quality output is vital for producing documents that leave a lasting impression, whether they are reports, presentations, or marketing materials.

With a monthly duty cycle of up to 50,000 pages, the E352DN is built to handle demanding workloads. It is equipped with a robust paper handling capability, featuring a 250-sheet input tray and a 100-sheet output bin. For users requiring more capacity, an additional 550-sheet tray can be added, making the printer flexible for different printing needs.

The E352DN also includes automatic duplex printing, which not only saves on paper costs but is also environmentally friendly. This feature allows users to print on both sides of a sheet automatically, contributing to reduced waste.

Connectivity options are another strong point of the Lexmark E352DN. It supports USB 2.0 and Ethernet, enabling shared access among multiple users in an office setting. Furthermore, the printer is compatible with various operating systems, including Windows, Mac, and Linux, ensuring broad usability across different platforms.

In terms of security, the E352DN offers features that safeguard sensitive information, including secure print functionality. This capability requires users to enter a PIN code at the printer before their documents are released, making it ideal for organizations handling confidential material.

Overall, the Lexmark E352DN combines speed, quality, and advanced features, making it a solid choice for businesses looking to enhance their printing capabilities. With its user-friendly design and robust performance, it stands out in the competitive landscape of monochrome laser printers.
Top Page Image Contents