Lexmark E352DN manual Solving print quality problems, Problem Action, Http//support.lexmark.com

Page 55

Troubleshooting

Solving print quality problems

The information in the following table may help you solve print quality problems. If these suggestions do not correct the problem, call for service. You may have a printer part that requires adjustment or replacement.

Problem

Action

Print is too light.

• The toner in the toner cartridge may be low.

 

• Change the Toner Darkness setting in the Quality menu.

 

• Change the Brightness setting in the Quality menu.

 

• Change the Contrast setting in the Quality menu.

 

• If you are printing on an uneven print surface, change the Paper Weight and Paper

 

Texture settings in the Paper menu.

 

• Verify the correct print media is being used.

Toner smears, or print

• If you are printing on an uneven print surface, change the Paper Weight and Paper

comes off the page.

Texture settings in the Paper menu.

 

• Verify the print media is within the printer specifications. For more details, see

 

Understanding print media guidelines on page 10.

 

If the problem continues, contact the Lexmark Customer Support Center at

 

http://support.lexmark.com.

Toner appears on the

Toner is on the transfer roll. To help prevent this, do not load print media that is smaller

back of the printed page.

than the page size of the job to be printed.

 

Open and close the front door to run the printer setup cycle and clean the transfer roll.

 

 

Toner fog or background

• Check the photoconductor kit to make sure it is installed correctly.

shading appears on the

• Replace the photoconductor kit.

page.

 

Solving print quality problems

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents E352dn Edition June Contents Contents Printer overview Learning about the printerLearning about the printer Finishing Menu Paper MenuPostScript Menu Ppds MenuBack Understanding the control panelStatus Indicates Button or control panel FunctionUnderstanding print media guidelines Source Sizes Types Weight Capacity* sheetsWhat types of print media can be loaded? Understanding print media guidelines Paper characteristicsSelecting print media PaperSmoothness Unacceptable paperSelecting preprinted forms and letterhead Understanding print media guidelines Selecting paperMedia source or process Print side Top TransparenciesUnderstanding print media guidelines Printing on letterhead Selecting transparenciesLabels EnvelopesCard stock Storing print mediaAvoiding jams Loading the 250-sheet tray PrintingPrinting Printing Extending the tray for legal-size or folio-size paper Printing Attaching the dust cover Loading the manual feeder Sending a job to print Linking traysCanceling a job from the taskbar Canceling a print jobCanceling a job from the printer control panel Canceling a job from a computer running WindowsCanceling a job from a Macintosh computer Printing the menu settingsCanceling a job from a Macintosh computer running Mac OS Printing a font sample list Printing a network setupAccessing the system board Installing optionsInstalling options Installing options Adding a memory card Access the system board see Accessing the system board onBoard on Adding a flash memory cardInstalling an optional 550-sheet drawer Click Start Æ Settings Æ Printers Recognizing installed optionsClick File Æ Properties Click the Install Options tab Conserving supplies Supply Menu selection item What the setting doesMaintaining the printer Storing suppliesPart number Description Average cartridge yield Maintaining the printerChanging a toner cartridge Ordering a toner cartridgeMaintaining the printer Ordering a photoconductor kit Photoconductor kit end-of-lifeChanging a photoconductor kit Maintaining the printer Recycling Lexmark products Maintenance kitMachine voltage Part numbers Message What to do Clearing jamsIdentifying jams Understanding jam messagesClearing jams Clearing a jamClearing jams Clearing jams Clearing jams Clearing a jam in the manual feeder Clearing jams Online customer support Calling for service TroubleshootingChecking an unresponsive printer Set Page Protect to Off from the Setup Menu Solving printing problemsTroubleshooting Symptom Cause SolutionConfiguration menu see Turning on Reduced Curl mode Turning on Reduced Curl modeOption Action Solving option problemsOccurring, see Avoiding jams on Solving service message issuesSolving paper feed problems Problem SolutionHttp//support.lexmark.com Solving print quality problemsProblem Action Understanding print media guidelines on210C 410F Troubleshooting Driver option Purpose Values† Menu selection Purpose ValuesCleaning the printhead lens Close the front door Turn the printer on Disabling control panel menus Administrative supportEnabling control panel menus Administrative support Restoring factory default settingsSelecting printer operating mode Setting security using the Embedded Web Server EWSUsing the secure Embedded Web Server Setting the system passwordClick Configuration Locking the control panel menus Click Menu Lockout SetupIndustry Canada compliance statement Conventions Electronic emission noticesEuropean Community EC directives conformity Product energy consumption Noise emission levelsLaser notice Statement of Limited Warranty for Lexmark E352dnLimited warranty service Additional rights Numerics IndexIndex
Related manuals
Manual 4 pages 59.49 Kb

E352DN specifications

The Lexmark E352DN is a monochrome laser printer designed for small to medium-sized businesses seeking efficiency and performance without breaking the bank. Known for its reliability and quality, this printer delivers professional-grade prints with impressive speeds and excellent output quality.

One of the standout features of the E352DN is its fast print speed, which can reach up to 33 pages per minute (ppm). This efficiency is essential for busy work environments where time is of the essence. Additionally, the first page out time is quick, typically around 6.5 seconds, enabling users to get their documents printed promptly.

The E352DN boasts a resolution of up to 1200 x 1200 dots per inch (dpi), ensuring sharp text and crisp graphics. This high-quality output is vital for producing documents that leave a lasting impression, whether they are reports, presentations, or marketing materials.

With a monthly duty cycle of up to 50,000 pages, the E352DN is built to handle demanding workloads. It is equipped with a robust paper handling capability, featuring a 250-sheet input tray and a 100-sheet output bin. For users requiring more capacity, an additional 550-sheet tray can be added, making the printer flexible for different printing needs.

The E352DN also includes automatic duplex printing, which not only saves on paper costs but is also environmentally friendly. This feature allows users to print on both sides of a sheet automatically, contributing to reduced waste.

Connectivity options are another strong point of the Lexmark E352DN. It supports USB 2.0 and Ethernet, enabling shared access among multiple users in an office setting. Furthermore, the printer is compatible with various operating systems, including Windows, Mac, and Linux, ensuring broad usability across different platforms.

In terms of security, the E352DN offers features that safeguard sensitive information, including secure print functionality. This capability requires users to enter a PIN code at the printer before their documents are released, making it ideal for organizations handling confidential material.

Overall, the Lexmark E352DN combines speed, quality, and advanced features, making it a solid choice for businesses looking to enhance their printing capabilities. With its user-friendly design and robust performance, it stands out in the competitive landscape of monochrome laser printers.
Top Page Image Contents