Lexmark S410 manual Using flash drives, Supported file types, Using a flash drive with the printer

About your printer

	Use	To
12	Color	Switch to color mode.
13	Black	Switch to black‑and‑white mode.
14	Start	Start a job, depending on which mode is selected.
15	Cancel	• Cancel a print, copy, scan, or fax job in progress.
		• Clear current settings or error messages, and return to previous settings.
16	Wi‑Fi indicator	Check the wireless status of your printer.
17	Eco‑Mode	• Change to Sleep mode after the printer is left idle for 10 minutes.
		• Reduce the screen brightness.

Using flash drives

Supported file types

•.jpg, .jpeg, .jpe (Joint Photographic Experts Group)

•.tiff, .tif (Tagged Image File Format)

16

Using a flash drive with the printer

Make sure the flash drive contains files that are supported by the printer. For more information, see “Supported file types” on page 16.

1Insert a flash drive into the USB port.

	E
	IV
	R
H	D
S
LA
F

Notes:

•The flash drive uses the same port that is used for a PictBridge camera cable.

•An adapter may be necessary if your flash drive does not fit directly into the port.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

2Follow the instructions or select from available options on the printer display.

Note: If the printer does not recognize the memory device, then remove and reinsert it.