Jameco Electronics Superpro Series Radix, Search, Next, Encryption Table, Load, Vector Table

Page 13

Swap MSB and LSB byte order for the specified word width in the address range.

Figure 13. Swap Buffer

Radix

Toggles between HEX and DEC (Decimal) memory address display.

Search

Searches for a combination of HEX/ASCII codes (search string).

Next

Performs the next search for the search string in Search.

2.2.2Encryption Table

The Load Encryption Table, with its two sub-menus, manages an encryption array. The two sub-menus will appear only if the chip selected is equipped with an encryption array.

Load:

Brings up the Load Encryption Table dialogue box. Enter the name of the file to be loaded in the input line provided.

Edit:

Opens the Encryption Buffer Edit window for viewing and editing.

2.2.3 Vector Table

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page User’s Guide Copyrights Contents Appendices Customer Support Error MessagesTest Alt-T Option Alt-OProgramming hardware include the following items Software include the following featuresGuide consists of three main parts Following conventions are used in this manualStandard package contains the following Minimum requirement is as followsRunning the Program Chips with more than 48 pins on SuperproIII Adapters with 48 pins or less on SuperproIIILoad Ctrl-O File Alt-FSave Buffer Alt-BExit EditSwap CopySearch RadixNext Encryption Table1 Run Device Alt-DRead Run ProgramBlank Check VerifyData Compare AutoBuff Start Chip EndBuff End EditAutoWord Format Even Word ByteOdd Word New Pattern Test Alt-TDelete Pattern Edit PatternOptions Alt-O Setting4 TTL&CMOS test Auto Find DeviceClick Option Auto Increment Auto Increment model dependantSave config file Load config fileCustomer Support Xeltek Technical Support Limited Warranty Error MessagesInvalid File Type
Top Page Image Contents