Jameco Electronics Superpro Series manual Invalid File Type

Page 27

3.2.1Invalid File Type:

An input file with wrong format is selected. Please select right format for the input file.

3.2.2Init Programmer Error(Programmer initialization error):

Communication searches no programmer connected. Software only works in demo mode. Make sure programmer powering on, search programmer with communication (See Setting sub menu) again.

3.2.3Algorithm file Not Found:

Every device has an algorithm file. After selecting the device, algorithm file will be loaded (DLL file). If loading fails, this message will appear.

Image 27

Contents Page User’s Guide Copyrights Contents Option Alt-O Customer Support Error MessagesAppendices Test Alt-TFollowing conventions are used in this manual Software include the following featuresProgramming hardware include the following items Guide consists of three main partsStandard package contains the following Minimum requirement is as followsRunning the Program Chips with more than 48 pins on SuperproIII Adapters with 48 pins or less on SuperproIIILoad Ctrl-O File Alt-FEdit Buffer Alt-BSave ExitSwap CopyEncryption Table RadixSearch Next1 Run Device Alt-DRead Run ProgramAuto VerifyBlank Check Data CompareEditAuto Chip EndBuff Start Buff EndWord Format Byte Even WordOdd Word New Pattern Test Alt-TDelete Pattern Edit PatternAuto Find Device SettingOptions Alt-O 4 TTL&CMOS testClick Option Auto Increment Auto Increment model dependantLoad config file Save config fileCustomer Support Xeltek Technical Support Limited Warranty Error MessagesInvalid File Type