Recording a TV programme that you have been watching
While you watch live TV, press OK. The time shift bar appears.
Press the the 
arrow key. to find the chapter where you want to start to record..
Press 
to start the record.
Recording a TV programme through the Time Shift Bar
While you watch live TV, press OK.
The time shift bar appears.
Press the
Move to the desired programme by using
the 
/ 
arrow keys.
Press OK to select the programme.
Press | . to start the record. |
Note
Recording from the time shift buffer will record the full programme from beginning to the end, even if you start the recording after the programme has already begun. As this is a relatively complex operation, the box does not display the image while the buffer is transferring the start of the programme (to the hard disk). At the end of this operation, the playback will start again automatically at the point where you started the recording. The recorded programme will be indicated in red in the Time Shift bar.
Recording by setting a timer through the TV guide
Press 
on the remote control to go to the TV Guide.
Scroll to the programme you want to record.
Press 
on the remote control. Press EXIT several times to close the menus.
Recording with a series link
Press 
on the remote control to go to the TV Guide.
Press 
again to go to the 8 days TV Guide. Use the 
/ 
/ 
/ 
arrow keys to scroll to the programme you want to record.
Press the
If the programme is in a series, the Digital Terrestrial Receiver displays the following screen:
Select the action to perform:
•Press the
•Press the
Once you have pressed one of those two keys, the record is set.
Note: all record programming are called Timers recording. By pressing Timer button you could access to the list, check and correct decisions taken to resolve conflicts.
E N G L I S H
Using your Digital Terrestrial Receiver | 19 |